Posts: 31
Threads: 0
Joined: Jun 2012
Doing it right cost less than doing it over
Posts: 1,360
Threads: 0
Joined: Sep 2007
Look for 9x27" Unisaw extension wings. The Unisaw extension wings also fit the various 10" contractor saws of that vintage. Those linked above are for a 9" saw.
Posts: 2,502
Threads: 0
Joined: Feb 2001
Something else to think about, back when my only saw was a craftsman contractor saw (same 27" deep table as yours I was able to pick up a second saw for about $100 and bolted the two together for a larger work surface and it was nice to have a place to always have a dado setup.
Duke
Posts: 1,622
Threads: 0
Joined: Mar 2008