▼
Posts: 27,512
Threads: 0
Joined: Jul 2002
Location: Pacific ocean now much further away!
...to about two years. I’m thinking I’m going to have to upgrade. The ones that are failing are the Takane “Made in USA” ones. I was buying them from Klockit, but they have issues with bad customer service so I switched to Ronnel. I’m seeing the same thing with them as well, they all fail at about the same time. The ones I used before were failing at about a year, so I switched to these. I’m make a lot of clock cases, but I may have to rethink making them if I can’t get a decent movement.
I’m interested in suggestions!
VH07V
▼
Posts: 12,191
Threads: 2
Joined: Nov 1999
Location: Nebraska City
(07-01-2019, 05:07 PM)EightFingers Wrote: ...to about two years. I’m thinking I’m going to have to upgrade. The ones that are failing are the Takane “Made in USA” ones. I was buying them from Klockit, but they have issues with bad customer service so I switched to Ronnel. I’m seeing the same thing with them as well, they all fail at about the same time. The ones I used before were failing at about a year, so I switched to these. I’m make a lot of clock cases, but I may have to rethink making them if I can’t get a decent movement.
I’m interested in suggestions!
I purchased several from Klockit, last time well over 10 years ago. One of the chiming ones started acting squirrelly a couple years back, but it was one in service for probably 15 years with no problem. I still have a couple NIB in the cabinet, just haven't gotten around to replacing it or making another clock.
Posts: 13,412
Threads: 0
Joined: Jun 2004
Location: Texas
My first thought would be to talk to an old clock repair person. When he's done telling you what junk they all are, maybe he can send you to a better supplier.
Posts: 27,512
Threads: 0
Joined: Jul 2002
Location: Pacific ocean now much further away!
Not any clock repair people here in this part of Hawaii, old or otherwise.
VH07V
Posts: 1,029
Threads: 3
Joined: Jun 2011
Location: N. Cincy inside the loop
Seems to be a dying craft where I am.
Posts: 162
Threads: 1
Joined: Sep 2017
07-01-2019, 10:53 PM
(This post was last modified: 07-01-2019, 10:54 PM by Woodworm!.
Edit Reason: wrong url
)
(07-01-2019, 05:07 PM)EightFingers Wrote: ...to about two years. I’m thinking I’m going to have to upgrade. The ones that are failing are the Takane “Made in USA” ones. I was buying them from Klockit, but they have issues with bad customer service so I switched to Ronnel. I’m seeing the same thing with them as well, they all fail at about the same time. The ones I used before were failing at about a year, so I switched to these. I’m make a lot of clock cases, but I may have to rethink making them if I can’t get a decent movement.
I’m interested in suggestions!
Have you tried the high torque clock movements? Have always had good luck with this place.
https://www.clockworks.com/clock-movemen...-only.html
Posts: 12,458
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
I've had very long life with the Seiko movements.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
▼
Posts: 114,777
Threads: 0
Joined: Jun 2002
Location: Sparkling Clearwater, Fl. Tampa Bay Area
(07-02-2019, 05:11 AM)fredhargis Wrote: I've had very long life with the Seiko movements.
........................
IME Seiko is the best also...I like the continuous sweep movements better than the jump-second.
Often Tested. Always Faithful. Brothers Forever
Jack Edgar, Sgt. U.S. Marines, Korea, America's Forgotten War
Get off my lawn !
Posts: 10,677
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
I almost hate to ask this question, but did you change the battery?
Still Learning,
Allan Hill
Posts: 5,411
Threads: 0
Joined: Jun 2001
Location: Troy IL
(07-01-2019, 05:07 PM)EightFingers Wrote: ...to about two years. I’m thinking I’m going to have to upgrade. The ones that are failing are the Takane “Made in USA” ones. I was buying them from Klockit, but they have issues with bad customer service so I switched to Ronnel. I’m seeing the same thing with them as well, they all fail at about the same time. The ones I used before were failing at about a year, so I switched to these. I’m make a lot of clock cases, but I may have to rethink making them if I can’t get a decent movement.
I’m interested in suggestions!
either one of these will help you, call them tell them what you are looking for , tell them you don't want junk, see what they suggest.
I get real movements from timesavers.com
also have battery movements. that being said I haven't bought any for years from timesavers or clockparts things change in manufacturing. Best it to talk to them on the phone, see what they say.
I get my battery parts from clockparts.com
Life is what you make of it, change your thinking, change your life!
Don's woodshop
|
