#16
  
This is BRAND NEW in the Box never opened.
It's quite heavy so shipping would probably be pretty expensive.
I'm in the Rochester NY area

$225
I cut it three times & it's still too short!
Reply

#17
  Bench Dog Pro Contractor Router Table dawoodguy This is BRAND NEW in...
(03-19-2021, 12:26 PM)dawoodguy Wrote: This is BRAND NEW in the Box never opened.
It's quite heavy so shipping would probably be pretty expensive.
I'm in the Rochester NY area

$225

do you have a link to the actual model or pix?
Reply
#18
  Bench Dog Pro Contractor Router Table dawoodguy This is BRAND NEW in...
wish you were closer to Indiana
Reply
#19
  Bench Dog Pro Contractor Router Table dawoodguy This is BRAND NEW in...
(03-19-2021, 12:26 PM)dawoodguy Wrote: This is BRAND NEW in the Box never opened.
It's quite heavy so shipping would probably be pretty expensive.
I'm in the Rochester NY area

$225

FYI on shipping

Check out UPS flat rate, assuming it is under 50lbs and less than 1780 sq in.

I shipped a Rockwell 1072 tenon jig from San Diego to Wisconsin for under $30, ground 

It was from their website and I dropped off at a local UPS store.  The non-flat rate was above $80


-Brian
Reply

#20
  RE: Bench Dog Pro Contractor Router Table BpB123 [quote='dawoodguy' p...
(03-21-2021, 02:07 PM)BpB123 Wrote: FYI on shipping

Check out UPS flat rate, assuming it is under 50lbs and less than 1780 sq in.

I shipped a Rockwell 1072 tenon jig from San Diego to Wisconsin for under $30, ground 

It was from their website and I dropped off at a local UPS store.  The non-flat rate was above $80


-Brian

Thanks Brian :-)
I cut it three times & it's still too short!
Reply
#21
  Bench Dog Pro Contractor Router Table dawoodguy This is BRAND NEW in...
(03-19-2021, 12:26 PM)dawoodguy Wrote: This is BRAND NEW in the Box never opened.
It's quite heavy so shipping would probably be pretty expensive.
I'm in the Rochester NY area

$225

Busy weekend...sorry I didn't respond earlier...make me an offer


Attached Files Image(s)
   
I cut it three times & it's still too short!
Reply
#22
  Bench Dog Pro Contractor Router Table dawoodguy This is BRAND NEW in...
weighs 46 pounds
24"x27"x5"
shipped from 14445

Motivated seller
I cut it three times & it's still too short!
Reply
#23
  Bench Dog Pro Contractor Router Table dawoodguy This is BRAND NEW in...
I checked UPS Flat Rate shipping that Brian mentioned above.  This does not qualify. The largest they ***** is 1728 cubioc inches not square inches.  Based on the dimensions provided this comes out to 3240 cubic inches.  So bummer for me.
Reply
#24
  Bench Dog Pro Contractor Router Table dawoodguy This is BRAND NEW in...
Ricc--did you get my PM a few days ago?
earl
Reply
#25
  Bench Dog Pro Contractor Router Table dawoodguy This is BRAND NEW in...
Shameless bump....make me an offer.
I cut it three times & it's still too short!
Reply
Bench Dog Pro Contractor Router Table


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.