#17
  
When I had my shop built, I put up this pegboard and these two cabinets that I had in a hurry just to get a workplace to put together the rest of the shop.  I also had my old workbench (no drawers) underneath it.  Now that I've been in the space for a while, I know what I use more often and what I use less often.  I found I was getting tools out of the drawers fairly often and some items hanging on the pegboard weren't used very much.  On a whim, and with plywood and OSB coming down, I decided to build a French cleat wall.  The hanging items also gave me a chance to get a little more practice with the Domino.  It was definitely helpful working on relatively inconsequential pieces.

Before:
[attachment=38189]

[attachment=38190]

[attachment=38191]

[attachment=38192]

Shelf for the most important piece of shop equipment.
[attachment=38193]

[attachment=38194]
Project Blog Got it all up-to-date, and I promise to keep it up-to-date.
Reply

#18
  French Cleat Tool Wall lincmercguy When I had my shop b...
[attachment=38199]


[attachment=38195]

[attachment=38196]

[attachment=38197]

[attachment=38198]

[attachment=38200]

[attachment=38201]

[attachment=38202]

[attachment=38203]
Project Blog Got it all up-to-date, and I promise to keep it up-to-date.
Reply
#19
  French Cleat Tool Wall lincmercguy When I had my shop b...
I like it. Except for one small detail. Why so few tape measures? I think I have 25, at least.
I no longer build museums but don't want to change my name. My new job is a lot less stressful. Life is much better.

Garry
Reply
#20
  French Cleat Tool Wall lincmercguy When I had my shop b...
Very nice, gives me some ideas.

...oh and I have about 15 tape measures.....
....the measure of a man is not what he does when people are around, it is what he does when no one is around.....

USAF, 1976-1982
Reply
#21
  French Cleat Tool Wall lincmercguy When I had my shop b...
I thought my four tapes were enough. One is over by the lumber rack. I use metal rulers more, I have an extra one that lives on my table saw fence.

Most of it are variations of pictures I saw on the web.

On the drill rack, I did use screws to attach the bottom supports to the vertical pieces. If I have to get new ones at some point, I can take them off to change the width. I didn't want to permanently glue it with dominos.
Project Blog Got it all up-to-date, and I promise to keep it up-to-date.
Reply
#22
  French Cleat Tool Wall lincmercguy When I had my shop b...
I like to use French cleats as often as I can. They're so practical.

Jim
Jim
Reply
#23
  French Cleat Tool Wall lincmercguy When I had my shop b...
Nice work Linc. Like it!
Gary

Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Reply
#24
  French Cleat Tool Wall lincmercguy When I had my shop b...
Lookin good (17issosuckie,wishitwasfixed)
Steve

Missouri






 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
French Cleat Tool Wall


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.