Posts: 18,610
Threads: 0
Joined: Jul 2006
Location: Milwaukee area
(05-27-2018, 12:46 PM)JosephP Wrote: We did some rewiring at our old church...used stranded there...that was certainly nicer to work with and not much more as I recall.
Yes, stranded can be very nice but I have run into a receptacle wired by a licensed electrician that had half the conductors out from under what was a now loose screw. I replaced it with one of the nice side-clamping types which I think work great for stranded. Ironically although they're sold for stranded and solid, I don't think the side-clamping work that great for solid.
So stranded I like side-clamping.
Solid I like screw-type.
Posts: 36,609
Threads: 3
Joined: Nov 2004
Location: RTP, NC
(05-27-2018, 02:09 PM)Phil Thien Wrote: So stranded I like side-clamping.
this has become my preferred solution for 10 gauge. stranded plus a side clamping receptacle.
Posts: 13,412
Threads: 0
Joined: Jun 2004
Location: Texas
Never had trouble with #10, Just bend it once. Or strip it back 2 inches to wind it around the screw then trim off.
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
I bought all stranded, two 500' rolls when I ran #10 for my 220 rec's.
Cost is cheaper with the big rolls.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 9,459
Threads: 0
Joined: Dec 2004
I was not able to find a cost savings in 500' vs 250' from menards or lowes. 250' fit my lazy susan cable unwinder easier too. I could even have 12 and 10 on at the same time.
Glad its my shop I am responsible for - I only have to make me happy.
Posts: 24,334
Threads: 0
Joined: Feb 2002
Location: Elizabethtown, KY
05-30-2018, 07:57 PM
(This post was last modified: 05-30-2018, 07:58 PM by Wild Turkey.)
(05-27-2018, 11:01 AM)fredhargis Wrote: I think such a comment (getting something accomplished) demands you put up some pics.
Hope this is what you were thinking about.
There are 31 lamps lit -- 16 amp draw
110 and 220 volt receptacles alternating across walls.
Now I've just got to get the trench dug and conduit run for power line.
If it quits raining long enough
"Truth is a highway leading to freedom" --Kris Kristofferson
Wild Turkey
We may see the writing on the wall, but all we do is criticize the handwriting.
(joined 10/1999)
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
Lights up before the ceiling/insulation?
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 24,334
Threads: 0
Joined: Feb 2002
Location: Elizabethtown, KY
(05-30-2018, 09:18 PM)Stwood_ Wrote: Lights up before the ceiling/insulation?
Won't be a "ceiling" and insulation will be sprayed on foam and budget may delay it for a while.
And the wiring had to be finished before inspection, etc.
Lights are on two circuits just to make sure.
"Truth is a highway leading to freedom" --Kris Kristofferson
Wild Turkey
We may see the writing on the wall, but all we do is criticize the handwriting.
(joined 10/1999)
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
(05-30-2018, 09:23 PM)Wild Turkey Wrote: Won't be a "ceiling" and insulation will be sprayed on foam and budget may delay it for a while.
And the wiring had to be finished before inspection, etc.
10-4 on that.
That will probably be good. That way if you have a leak (stray screw in the tin) you can spot it.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 12,053
Threads: 1,611
Joined: Jan 2001
Location: Kansas City, Kansas
this is a wire puller!
![[Image: transmission-puller-tensioner-feature.jpg]](http://tse-international.com/wp-content/uploads/2015/06/transmission-puller-tensioner-feature.jpg)
