Woodnet Forums › › Active › Woodturning v
Who are you
Thread Modes
Who are you
AnthonyYak Offline
slightly skewed
Posts: 8,687
Threads: 0
Joined: Oct 2003
#261
11-26-2008, 09:57 PM
On vacation for a while
If it don't hold soup, it's ART!!

Dry Creek Woodturning

Find
Reply
jacko Offline
Sailboat fuel consultant
Posts: 4,636
Threads: 0
Joined: Dec 2004
#262
11-27-2008, 12:15 AM
I'm Robert.
Been hooked on tools all my life. I started to build when I was 4 and that was 46 years ago. I have never been away from building something for more then a few months. When I was in Jr. High I got into turning wood and when in high School I was into turning metal. Then that was the last I had done anything on a lathe. Until about a month ago when I picked up an old Delta. One older then I am.
Find
Reply
Bernie W Offline
Member
Posts: 366
Threads: 0
Joined: Dec 2005
#263
11-27-2008, 10:52 AM
As it says name is Bernie. 61 and have been turning 3 1/2 yrs. If mom called me by all three names it was time to become scarce.
Bernie

Genius is one per cent inspiration, ninety-nine per cent perspiration.
Find
Reply
AnthonyYak Offline
slightly skewed
Posts: 8,687
Threads: 0
Joined: Oct 2003
#264
12-05-2008, 04:43 PM
bump
If it don't hold soup, it's ART!!

Dry Creek Woodturning

Find
Reply
tlc Offline
Member
Posts: 3
Threads: 0
Joined: Dec 2008
#265
12-06-2008, 07:22 AM
My initials are tlc (hence the username). My first name is Tom.
I just turned 70 and have been dabbling in wood since I was 10 or so.
My dad was a real handyman and introduced me to various and sundry interests involved with 'doing stuff'.
My turning interest was rekindled when I purchased a PM45 several months ago.
I also have a shop full of old equipment I have been collecting for 60 years or so and am adding a couple of drill presses next week. The quest never stops.
I mostly just lurk and look, but tend to get looooong winded when I do have something to post.
tlc...
Remember: Keep your personal parts away from the moving parts.
Remember: Keep your personal parts away from the moving parts.
Find
Reply
AnthonyYak Offline
slightly skewed
Posts: 8,687
Threads: 0
Joined: Oct 2003
#266
12-13-2008, 10:10 PM
bump!
If it don't hold soup, it's ART!!

Dry Creek Woodturning

Find
Reply
woodrot Offline
Member
Posts: 125
Threads: 0
Joined: Nov 2005
#267
12-15-2008, 05:25 PM
hello, my name is steve. I'm 52, retired last year from Ky State Govt. (Env. Biologist). I have also been preaching for about 25 yrs. Been doing hobby flatwork for about 15 yrs., but often little done for months at a time, have a list of bookcases, shelves, furniture etc. from the kids which I'll never finish. I also subsitute teach in local school system which cuts into my hours a lot. Just ordered a jet mini to start turning. Motivated in a large part by the great pens and bowls seen here. I've yet to turn a lathe on. But will learn if I have the time. Currently trying to find someone in Bowling Green / Owensboro area to teach me the first hour introductory lesson. No clubs here, I'm in the boondocks.
Find
Reply
kludge Offline
Fixt---and grateful for the fix
Posts: 8,212
Threads: 0
Joined: Jul 2008
#268
12-15-2008, 06:27 PM
I'm Peter Brown, 31. Kludge is more than my handle, it's my way of life.

I just started turning in November, and while I love my time at the lathe I find that I cannot do anything right the first time. I must try and fail numerous times before I succeed. It's more rewarding for me when I do. If anything went smooth right off the bat, I think I'd drop over dead.

No one I know does any WWing. If it weren't for WN, I'd be lost.
Peter Brown

I can fix that...

shop-time.net
Website Find
Reply
thomas_1st Offline
Member
Posts: 571
Threads: 0
Joined: Mar 2002
#269
12-15-2008, 07:06 PM
OK, I'll chime in, only because I've enjoyed this post so much....

Turned my first project in high school, 'bout 35 years ago. Never turned again as I didn't have access to a lathe. Started to gather flat work tools about 10 years ago when kids grew up enough I could afford something for myself again. Then I bought a used jet from a guy at work and turned a couple bad sample bowls. It sat in the corner for 5 years or so collecting dust. I then started reading the turning forum seeing pictures thinking "wow, those are amazing!!!", I think I'll try that. It was way tooooooooo late before I heard the sucking sound!!!

Last year I upgraded to mustard, and that doesn't include new sorbys, crowns, dust collection, chucks, sharpening, sanding, I know, I know, you all know the story...

I typically turn bowls. Some lidded, most not, out of green blanks. One of my favorite woods is Spalted Hackberry, love that stuff. Turned one winged bowl out of zebrawood which I named the " Bloody Knuckle Bowl" for obvious reasons.

No outlet for them, most are gifts other than the ones LOML claims for her own. Probably turned 50 or so now, and still TONS to learn and enjoy. With that said, time to go stoke the fire, it was 22 degrees in the shop when I got home tonight and I want to play....

Take care and happy turning!!!
Tom
k honey, heading out to the shop now, love you...
Find
Reply
JRob Offline
Honored Veteran
Posts: 72
Threads: 0
Joined: Dec 2008
#270
12-15-2008, 07:21 PM
Jim Roberts, 51 years young from Bloomsburg, PA
I'm looking to get started in turning, just haven't amassed the necessary small fortune yet.
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf."
Find
Reply


Forum Jump:


Users browsing this thread: 8 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.