Posts: 299
Threads: 0
Joined: May 2002
Posts: 29,152
Threads: 1
Joined: Aug 2002
Quote:
14" SE bandsaw, using a 1" resaw blade
Willing to bet that is the issue right there
I expect you are flutter tensioning as well.
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
Posts: 299
Threads: 0
Joined: May 2002
Acctually, just have now resolved it. Laguna called, more tension on drive belt, adjusted motor/drive belt pulley.
That 1"resaw blade... excellent
Posts: 16,604
Threads: 0
Joined: Oct 2002
Location: Ra-cha-cha, NY
RickJ said:
checked balance, wheels & drive belt fine.
Loosen the drive belt. Make it floppy loose, so it just turns the wheel (no blade). See if it still vibrates. Take the belt off. See if the motor vibrates. Check the tightness of both sheaves to their shafts.
That's weird. Your solution wasn't there when my post went up.
And I would still check the sheave to shaft integrity.
Tom
“This place smells like that odd combination of flop sweat, hopelessness, aaaand feet"
Posts: 935
Threads: 0
Joined: Jul 2006
Deleting the post when you have solved your own problem is anathema to the sense of sharing and community that makes places like this work.
It's also just weird.
Good judgement is the product of experience.
Experience is the product of poor judgement.
Posts: 299
Threads: 0
Joined: May 2002
Tom,
Yep, It was the V drive belt. thanks
Posts: 299
Threads: 0
Joined: May 2002
yes it is weird... delete is nothing but decoraction.
