08-08-2015, 09:48 PM
That is a combination I have yet to explore or seen discussed.
Thoughts and comments?
Ag
Thoughts and comments?
Ag
|
Drawbore AND Loose Tennons
|
08-08-2015, 10:14 PM
Are you going to drawbore both sides?
Otherwise, how would it work? 
...Naval Aviators, that had balz made of brass and the size of bowling balls, getting shot off the deck at night, in heavy seas, hoping that when they leave the deck that the ship is pointed towards the sky and not the water.
AD1 T. O. Cronkhite 
08-08-2015, 10:37 PM
I am thinking you'd have to drawbore both sides, and I'm also thinking that is a recipe for splitting your tenon. I'd consider pinning it from both sides, but only after you glue and clamp it in.
Still Learning,
Allan Hill
08-08-2015, 11:53 PM
You could glue the tenons into the stretchers and let it dry, then drawbore the legs (assuming your building a table ) it will definitely slow your build time.
08-09-2015, 12:05 AM
I often drawbore one side of a domino and glue the other. There is no problem drawboeing both sides. The reason I drawbore is to make it knockdown or at least possible to dissemble and move.
homo homini lupus
"The best lack all conviction, while the worst are full of passionate intensity." Yeats Si vis pacem, para bellum Quodcumque potest manus tua facere instaner opere Ecclesiastes 
08-09-2015, 05:12 AM
If draw boring, why not make it easy and do with Miller Dowels?
Waiting to grow up beyond being just a member
www.metaltech-pm.com |
|
|
Users browsing this thread: 1 Guest(s)