Looking for some hardware, table/stool legs

[bennybmn]

So last year I made a couple of small step stools for my niece and nephew. I used a table leg top plate like this:


Linky link

These were definitely overkill, and demanded a bit more inboard offset than I wanted, but it worked. Later, when I visited the fam, I noticed my other nephew's stool (store bought) had similar hardware, but on a much smaller scale, still plenty stiff, but it allowed for mounting closer to the edge of the stool. I'd like to find those brackets, since it would make for a much more stable stool! Anyone have any ideas?
I've googled table leg top plate, angled top plate, stool leg top plate... Any other ideas? Thanks all!

[Allen]

Check with Rockler http://www.rockler.com/search/go?w=table...20hardware and Lee Valley http://www.leevalley.com/en/hardware/pag...&cat=3,43586,43590

Google has several places https://www.google.com/?gws_rd=ssl#q=scr...leg+plates

[bennybmn]

Thanks Allen. Most of the ones I've seen doing a google search are the larger size. I can't figure out a good search term to find the smaller ones... The 4 pack from Lee Valley seems like a nice low-cost option to at least try and see if I can get them closer to the corner. I'll keep lookin!!