Posts: 329
Threads: 0
Joined: Feb 2006
What type router bit is used for the outside edge of cabinet doors?
Thanks in advance,
Jerry
Posts: 29,152
Threads: 1
Joined: Aug 2002
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
Posts: 24,106
Threads: 0
Joined: Jan 2004
Or you can keep it square if you want the shaker look.
Matt
If trees could scream, would we be so cavalier about cutting them down? We might, if they screamed all the time, for no good reason.
-Jack Handy
Posts: 4,686
Threads: 0
Joined: Jan 2007
Before you commit to using any door edge profile first verify if it will work with your hinge choice. Some of these profiles will not work with european style cup hinges. You may need to alter one or the other.
Any free advice given is worth double price paid.
Posts: 329
Threads: 0
Joined: Feb 2006
Posts: 3,757
Threads: 0
Joined: Dec 2006
Location: SW Pa.
What kind of doors ? If raised panel . I would suggest you somewhat match the profile of your stile bit.
Shaker ... slight 21 degree chamfer.....
Ogee...... Ogee or slight round over...
Etc.. Etc ..
I personally would not use a round over with a shaker door...YMMV
If it can't kill you it probably ain't no good. Better living through chemicals.
Posts: 13,822
Threads: 0
Joined: Dec 2006
Location: KY
I would go to the borg, and look at the door profiles they have. I like no. 32 that Joe posted above.
