Posts: 920
Threads: 0
Joined: Oct 2001
My son is finishing his basement. He has about 140 linear feet of framing to build. He would like to buy a framing nailer capable of shooting 3.5" nails and a compressor that will do the job. This will most likely be used for one time. Of course he doesn't want to overspend. Any ideas for what he needs and probable costs would be appreciated. Thanks.
Posts: 40,104
Threads: 0
Joined: Apr 2007
I have to ask about the compressor use as I think you might not be seeing the bigger picture. He can use it to power a framing nailer and any other type plus a long list of tools. So it might get a fair bit of use beyond this one project and be something a bit more care is needed before choosing the one you want
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."
Phil Thien
women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around.
Posts: 12,046
Threads: 1,611
Joined: Jan 2001
Location: Kansas City, Kansas
Much as I hate to recommend Horror Fright, their compressor/nailer is gonna be the cheapest for that job.
I used my PC framing nailer for years on a 6 gallon pancake compressor to built houses/remodel with no problems.
Posts: 29,152
Threads: 1
Joined: Aug 2002
JMO but two hammers (yours and his) should knock out 140' in about two to three hours including layout
Is it really worth it for such a small job?
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
Posts: 40,104
Threads: 0
Joined: Apr 2007
Joe you don't know either's comfort level with a hammer. I hired a framer to build a one bedroom apt in a basement he was done with the whole thing in 7 hours working alone. I know it would have taken me days.
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."
Phil Thien
women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around.
Posts: 29,152
Threads: 1
Joined: Aug 2002
09-26-2016, 03:56 PM
(This post was last modified: 09-26-2016, 04:12 PM by JGrout.)
I would be far more comfortable with them using hammers over a power nailer if they have little experience at either building walls or operating a framer.
That is just me though YMMV
Edit to add:
box of framing nails will run 40-70 bucks average for 2500 nails I would expect that framing would take about 750 nails tops. You also will be hard pressed to get 3 1/2" nails ( most are 3 1/4") so if there could be a structural issue (depending on where they are) so it may be questionable to use a nail gun. even using a horror freight setup and nails you have ~$200-250 invested for one job....
Two hammers and two guys can drink a lot of coke for the difference. just a bit less beer
Joe
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
Posts: 1,998
Threads: 1
Joined: Aug 2016
I have operated a framing nailer off of a 3 gal HF compressor, but had to wait for it to catch up. Suggest a 6 gal one. As far as a nailer I have the 21 degree full head framing nailer from HF also. The nailer has not missed a beat but I have heard not to use HF nails in it. I use Hitachi 3.25" nails with no problem. 3.5" will protrude if nailing 2 ea 2Xs together. Also have used shorter nails without a problem. Roly
Posts: 874
Threads: 0
Joined: Apr 2006
I try to buy the best tools once, instead of junk two or three times.
Bostitch framing gun is the best in my opinion. I like the offset full head nails it uses, as you can fit about twice as many in the gun for fewer reloads. I also have the popular porter cable gun that takes the cheaper plastic collated nails. Works great, but not as strong as the Bostitch.
-who?
Posts: 12,606
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
If you're really stuck on the pneumatic nailer option, what about renting what's needed?
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 1,998
Threads: 1
Joined: Aug 2016
I agree with buying the best but the first post said it was a one time use and budget was a concern. A good nailer is in the $ 200-$300 range, to rent one in my area it is $25/day or $100/week. ( how long are you going to need it ) I would suggest a better compressor as they have many uses. The small one I used because it was portable that was used just for mower tires but instead of running a lot of hose I wanted to try it. Roly
