Posts: 1,741
Threads: 0
Joined: Jul 2003
Location: Denver,CO
11-07-2016, 11:29 PM
(This post was last modified: 11-15-2016, 11:07 PM by Jack01.)
Posts: 9,459
Threads: 0
Joined: Dec 2004
If it was local I would buy this to keep myself from using outfeed as a bench LOL. Good luck. Guessing I am going to end up with a mobile bench outfeed.
Glad its my shop I am responsible for - I only have to make me happy.
Posts: 1,741
Threads: 0
Joined: Jul 2003
Location: Denver,CO
Thanks Mike
Hopefully local woodneter will buy this.
Posts: 3,535
Threads: 0
Joined: May 2005
Location: Greater Fort Collins Area, CO
I had this on my PM66, not sure which size it is as the table comes in 2 versions - but both are solid, highly valuable, and increase the safety of a fixed table saw by measures.
Good luck w/ the sale and I encourage any who don't have an outfeed table or have considered a change to look closely at this device. It's a good one!
Michael
Every day find time to appreciate life. It is far too short and 'things' happen. RIP Willem
Posts: 1,741
Threads: 0
Joined: Jul 2003
Location: Denver,CO
Posts: 881
Threads: 0
Joined: Aug 2007
Wish this was closer!
Reality is a nice place to visit, but I wouldn't want to live there.
Posts: 1,741
Threads: 0
Joined: Jul 2003
Location: Denver,CO
Posts: 1,084
Threads: 0
Joined: Mar 2006
What a great outfeed table well worth $250.00.
Posts: 57
Threads: 0
Joined: Jul 2005
Will this fit a powermatic 66 with Biesemeyer fence?
Thanks,Dave
Posts: 1,741
Threads: 0
Joined: Jul 2003
Location: Denver,CO
Yes it will fit.
It connects to cabinet in the back.
I have installation manual ,I will send that to you by PM
![[Image: 25379894079_214b350daf_n.jpg]](https://c8.staticflickr.com/6/5596/25379894079_214b350daf_n.jpg)
" />![[Image: 22837410108_a02282b778_n.jpg]](https://c5.staticflickr.com/6/5442/22837410108_a02282b778_n.jpg)
![[Image: 22837412028_b55f2544d9_n.jpg]](https://c5.staticflickr.com/6/5690/22837412028_b55f2544d9_n.jpg)
