Posts: 612
Threads: 1
Joined: Dec 2016
I took on the task of building what I thought was going to be a simple miniature lighthouse. It has fought me all the way from the bottom to the top of the lighthouse and now I'm stumped. I'm trying to make the roof for the upper portion of the lighthouse in a hexagon shape with a slope to the roof. The only critical dimension on the six pieces that will make the roof is from the peak to the end of the overhang has to be roughly 2 1/2".
I thought I was pretty good at geometry in school but that was nearly 40 years ago.
I'm about to go find an 8th grader to get me straight on how to figure out the angles.
Can anyone here point me in the right direction? Thanks in advance.
Posts: 1,531
Threads: 0
Joined: Jan 2007
It is a compound angle cut. Tilt blade as well as angle miter guage.
This may help
www.jansson.us/jcompound.html#npyramid
John T.
Posts: 612
Threads: 1
Joined: Dec 2016
Thank you John....I would have never figured out the angles. I kept cutting test pieces and finally threw in the towel this morning.
Posts: 5,661
Threads: 1
Joined: Mar 2008
Location: Flemington, New Jersey
(03-04-2017, 06:29 PM)Duane N Wrote: Thank you John....I would have never figured out the angles. I kept cutting test pieces and finally threw in the towel this morning.
I just gotta say this, when you get frustrated with test cuts on power tools, just remember to be safe.
Backing off is a good idea.
Ag
Posts: 612
Threads: 1
Joined: Dec 2016
Good advice Ag but I wasn't and won't use a miter saw or table saw for the cuts. I made a make-shift miter box out of scrap plywood each time I tried different miters. The pieces are too small to use any type of power tool...most of the lighthouse was cut by hand.
Posts: 1,531
Threads: 0
Joined: Jan 2007
(03-04-2017, 07:45 PM)Duane N Wrote: Good advice Ag but I wasn't and won't use a miter saw or table saw for the cuts. I made a make-shift miter box out of scrap plywood each time I tried different miters. The pieces are too small to use any type of power tool...most of the lighthouse was cut by hand.
Just need to make jigs when working with small pieces. Clamps and double stick tape work wonders.
John T.
Posts: 612
Threads: 1
Joined: Dec 2016
(03-04-2017, 11:52 PM)JTTHECLOCKMAN Wrote: Just need to make jigs when working with small pieces. Clamps and double stick tape work wonders.
Exactly.....I'm happy to have all 10 digits to this point so doing it by hand is best and using a jig makes it safer. It's very therapeutic as well doing it by hand.
Posts: 3,066
Threads: 0
Joined: Jan 2004
03-05-2017, 12:37 PM
(This post was last modified: 03-05-2017, 12:40 PM by TomFromStLouis.
Edit Reason: ...
)
You brainiacs are amazing what with the compound angles and all. I just never go there. Visiting the answer website made MY brain hurt.
Nice lighthouse!
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 612
Threads: 1
Joined: Dec 2016
