Posts: 1,804
Threads: 0
Joined: Feb 2004
Location: Buckingham Township, PA
I'm putting my drill press on a mobile base, but I really don't want to put $60+ worth of casters under on it.
I know there are better casters out there, but these aren't going to roll very far, so I'm looking opinions on these casters from Grizzly:
Casters
Any other recommendations? I've found a few other suppliers but they want so much for shipping the price gets prohibitive again.
Jason
Posts: 669
Threads: 0
Joined: Oct 2008
I've taken the casters off of several Harbor Freight dollies and used them (dollies about $6 each, get four casters per dolly). Seem to work fine
Posts: 10,118
Threads: 0
Joined: Sep 2006
Location: South Alabama
+1 on the Harbor Freight casters. Surprisingly robust for the price.
Steve S.
------------------------------------------------------
Tradition cannot be inherited, and if you want it you must obtain it by great labour.
- T. S. Eliot
Tutorials and Build-Alongs at
The Literary Workshop
Posts: 2,115
Threads: 0
Joined: Apr 2005
+2 for the HF wheels. Your DP is probably really not that heavy. Work fine form my Griz 17" BS.
Posts: 2,574
Threads: 0
Joined: Feb 2001
I bought a mini pallet jack and have built small custom pallets for most of my stuff, for exactly the reason your mentioning.
4 sets of casters and your above the price of a pallet jack.
The best part is the tools don't shift the way some casters do.
2.5" of clearance is all you need to get the pallet jack under.
Some things seem a little unsteady, 18" bamdsaw is a little top heavy if floor isn't perfectly level.
Duke
Posts: 1,804
Threads: 0
Joined: Feb 2004
Location: Buckingham Township, PA
(04-18-2017, 11:45 AM)branchacctg Wrote: I've taken the casters off of several Harbor Freight dollies and used them (dollies about $6 each, get four casters per dolly). Seem to work fine
You're talking about furniture dollies? I hadn't even considered that option.
Jason
Posts: 1,617
Threads: 0
Joined: Feb 2010
Location: Coast of Maine
(04-18-2017, 12:29 PM)Jason28 Wrote: You're talking about furniture dollies? I hadn't even considered that option.
Yes. I've done the same thing, amazingly cheap. I also use them to move projects around the shop. For larger pieces like a chest of drawers I screw two together with a piece of plywood sized to fit the piece in process. When it's complete just remove the plywood and reuse the dollies.
g
I've only had one...in dog beers.
"You can see the stars and still not see the light"
The Eagles: Already Gone
Posts: 12,604
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
Yeah, the castors on those furniture dollies are really useful. I built my version of Norm's clamp rack and used the dolly castors. this thing probably weighs over 400# and those castors have been on it for well over 10 years.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 850
Threads: 0
Joined: Apr 2006
Location: Central MA
The problem with the casters form the furniture dollies is that they are not locking type casters. There is no way I'd want my drill press sitting on wheels with no good way to keep it from moving in use.
Posts: 608
Threads: 0
Joined: Jan 2005
Home Depot sells really good red casters that look a lot like the ones Woodcraft sells.
War Eagle!
