Posts: 15
Threads: 0
Joined: Jan 2017
I cut a hinge pocket on the wrong edge, the latch edge of my door. Any suggestions on best method to patch it?
[size=undefined]Anybody can become a woodworker, but only a Craftsmen can hide his mistakes!
-Walter Blodget[/size]
Posts: 14,725
Threads: 1
Joined: Dec 2006
Location: Traverse City MI
07-16-2017, 06:13 PM
(This post was last modified: 07-16-2017, 06:13 PM by goaliedad.)
Are you painting or staining the door? Cut a wood patch and glue it in???
Posts: 15
Threads: 0
Joined: Jan 2017
staining the door
[size=undefined]Anybody can become a woodworker, but only a Craftsmen can hide his mistakes!
-Walter Blodget[/size]
Posts: 12,046
Threads: 1,611
Joined: Jan 2001
Location: Kansas City, Kansas
Cut another at the opposite end, fabricate filler pieces and call the result a new design.
Or, to get really involved, cut matching hinges and install them as fillers.
Posts: 64,679
Threads: 3
Joined: Feb 2007
Location: Merryland
I know it won't help but I've done it too.
Posts: 2,078
Threads: 1
Joined: Feb 2009
Location: Mechanicsville, Md
It really depends on how "invisible" you want the repair. The suggestions already stated are perfect if you are not trying to be inconspicuous, nothing wrong with that. The more you want the repair to be hidden, the more work involved.
Just something to ponder.
I no longer build museums but don't want to change my name. My new job is a lot less stressful. Life is much better.
Garry
Posts: 596
Threads: 0
Joined: Sep 2007
What makes you think anyone will notice?
Posts: 12,885
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
Rip off that edge of the door to the depth of the hinge pocket and glue on a new piece of wood. Lots of effort but it will be nearly invisible when done.
John
Posts: 18,970
Threads: 0
Joined: Jul 2002
Location: Ohio
(07-16-2017, 08:51 PM)jteneyck Wrote: Rip off that edge of the door to the depth of the hinge pocket and glue on a new piece of wood. Lots of effort but it will be nearly invisible when done.
John
That is probably what I would do...or route it out and glue a new piece in so you don't disturb the face of the door.
Posts: 29,152
Threads: 1
Joined: Aug 2002
Well you have two things in your favor
one you have the cutoffs from your original efforts
Two you can trim the door the depth of the hinge pocket so it is more like a rabbet then glue in a piece of the cutoff you have
that preserves at least one face
One more question you should answer is have you put the bevel on the door latch side yet? you need clearance for the door to close properly and if you have not put the bevel on yet you may just be able to trim it off
Joe
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
