Posts: 13,412
Threads: 0
Joined: Jun 2004
Location: Texas
Very nice work! How long does it take to fill from 0 psi?
Posts: 18,494
Threads: 0
Joined: Jul 2006
Location: Milwaukee area
Very nice. I really like that shorter, wider tank.
"Links to news stories don’t cut it." MsNomer 3/2/24
Posts: 3,750
Threads: 0
Joined: Dec 2006
Location: SW Pa.
08-13-2017, 07:33 AM
(This post was last modified: 08-13-2017, 07:34 AM by fishhh4.)
(08-13-2017, 07:00 AM)daddo Wrote: Very nice work! How long does it take to fill from 0 psi?
16 minutes from 0 to 140 psi . I set it to start charging at 100 . Is that to low ?
Thank you .
If it can't kill you it probably ain't no good. Better living through chemicals.
Posts: 13,412
Threads: 0
Joined: Jun 2004
Location: Texas
I think 100 is fine, mine is set at 95.
Posts: 16,604
Threads: 0
Joined: Oct 2002
Location: Ra-cha-cha, NY
(08-13-2017, 07:33 AM)fishhh4 Wrote: 16 minutes from 0 to 140 psi . I set it to start charging at 100 . Is that to low ?
Thank you .
Depends on what you're using the air for. If you're spraying, then pumping it up to 175 psi cut-off only to regulate it down to 40 psi at the gun is just wasting a huge amount of energy. If running large impact guns for removing wheels from trucks, then you'll need 100 psi or more at the gun, and lots of volume, so pumping it up high to provide enough reserve that the gun isn't dropping below 100 is a good thing.
Oh, and the cfm out of the compressor pump will drop as the pressure increases, so if it can't keep up at the higher pressure (like with spray guns or bead blaster cabinets), you may find that it drops to a lower pressure and then stabilizes. But do be careful about duty-cycle - most small piston compressors don't have a 100% duty-cycle rating. The motor almost certainly does, but the pump probably doesn't.
Tom
“This place smells like that odd combination of flop sweat, hopelessness, aaaand feet"
Posts: 3,750
Threads: 0
Joined: Dec 2006
Location: SW Pa.
08-14-2017, 08:06 PM
(This post was last modified: 08-14-2017, 08:10 PM by fishhh4.)
The switch states up to 170 psi , but I am not taking this old tank that high . Since I tightened the belts ,and fixed some delivery side leaks . It is at 13 minutes to fill This thing. It is so quiet . I could probably whisper to you while it's running .
I blow things off a lot . Got a air sander . air tools once a while . Spray a little .
If it can't kill you it probably ain't no good. Better living through chemicals.
Posts: 64,677
Threads: 3
Joined: Feb 2007
Location: Merryland
Wow!, very nicely done
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
Sweet. Nice job
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 253
Threads: 0
Joined: Jun 2010
Fish,
Is that the same compressor that was stalking you on the way home? You did a great job on it!
Posts: 3,750
Threads: 0
Joined: Dec 2006
Location: SW Pa.
(08-21-2017, 06:14 PM)efmrrt Wrote: Fish,
Is that the same compressor that was stalking you on the way home? You did a great job on it!
The one and the same .... Thank you . I finally got the delivery side to quit leaking ... Don't buy Harbor freight brass ... junk .. Went all steel from the hardware store . Quit leaking . 20 dollar lesson .
If it can't kill you it probably ain't no good. Better living through chemicals.
