Posts: 219
Threads: 0
Joined: May 2013
Nice table. Hideous cooler
WDE
Posts: 13,412
Threads: 0
Joined: Jun 2004
Location: Texas
I would install an additional metal ring around the wood hole with a 1/4" air gap for better heat protection, being set 1/8" above the surface as well it would serve to help prevent stuff from rolling or falling off into the hole.
Unless over time you don't mind the wood turning black and/or drying and cracking.
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
That picture was making my neck hurt. I reduced the size a smidge so the auto correct software didn't turn it.
Is that a COKE opener? If it is I like it a LOT, if it's brand X or Poopsie burn the whole thing to the ground
Worst thing they can do is cook ya and eat ya
GW
Posts: 608
Threads: 0
Joined: Jan 2005
Like the table but not the cooler in the background"
War Eagle!
Posts: 2,199
Threads: 1
Joined: Sep 2003
Location: Maryland
(09-07-2017, 11:52 AM)WaterlooMarc Wrote: What's the glass on the right, an induction burner?
Hmmm.....not a bad idea. One of these is in my future...
Posts: 2,115
Threads: 0
Joined: Apr 2005
