01-08-2018, 11:00 AM
(This post was last modified: 01-08-2018, 11:17 AM by Earl Kelly.)
(01-06-2018, 03:56 PM)Halfathumb Wrote: I have slides "562H5330C" and I'm having a difficult time getting the Locking Mechanism #T51-170.01.04 to fully engage. I checked numerous times on the installation of all the parts and wind up with the slides fully engaging with the locking mechanisms. 2 drawer fronts are made with 1/2 BDT but 1 drawer doesn't close even. Meaning one dire of the drawer front is flush with the face frame while the other side has approx. 3/8 gap.
Anyone else experience this problem and what did you do to fix it?
Check that locking mechanism part # Blum calls for a part BT51.1700.04 Also, if you cannot turn the drawer box upside down and easily slide a unmounted slide into the lock you may have a problem with the drawer box construction.
Edited part number. Missed the .04 in the catalog.
Earl
Furniture...The Art of a Furnituremaker
Earl Kelly
Earl Kelly