Woodnet Forums › › Active › Woodworking v
trying to cut unknown angle accuratly
Thread Modes
trying to cut unknown angle accuratly
ez-duzit Offline
Member
Posts: 589
Threads: 0
Joined: Jan 2017
Location: Marina del Rey
#15
02-12-2018, 04:50 AM (This post was last modified: 02-12-2018, 04:50 AM by ez-duzit.)
(02-11-2018, 06:56 AM)Snipe Hunter Wrote: I'm sure the guy with one post (quite possibly a spammer) who doesn't know how to cut an angle or what angle he has to cut owns a Japanese Saw.

For ~$40 the Japanese Razor saw is what I use daily. If the OP doesn't have one already, he should, and he will find many other uses for it.
https://www.japanwoodworker.com/products...t-razorsaw
Wood is good. 
Find
Reply
paulmars Offline
New User
Posts: 2
Threads: 0
Joined: Feb 2018
#16
02-12-2018, 08:14 AM
i did it. Trial and error on scrap.
Find
Reply
Cooler Offline
Member
Posts: 7,421
Threads: 1
Joined: Sep 2005
#17
02-12-2018, 08:25 AM
There are several good videos online showing how to transfer an angle using a sliding bevel square and a protractor.  Most are under 2 minutes.
No animals were injured or killed in the production of this post.
Find
Reply
tomsteve Offline
Member
Posts: 4,670
Threads: 0
Joined: Jan 2008
#18
02-12-2018, 11:14 AM
(02-12-2018, 08:14 AM)paulmars Wrote: i did it. Trial and error on scrap.

good on ya! and the simplest solution,too.
Find
Reply


Forum Jump:


Users browsing this thread: 4 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.