Posts: 139
Threads: 0
Joined: Feb 2018
I recently made a jig that fits on my belt sander and allows me to thickness sand wood right down to veneer. Although it can only do wood up to the width of the belt, it also didn't cost $1200.
I don't try to sell plans or anything, but I'm sure the clever people here can figure it out easily enough. I made a video that can be seen here:
https://youtu.be/BaozDNHvEns
Cheers,
Paul M
http://openwoodshop.com
Posts: 2,273
Threads: 3
Joined: Feb 2005
Location: Central America
That's pretty neat. My only suggestion would be to incorporate a spring loaded hold down before the wood meets the sander like how commercial sanders are made. That way you don't inadvertently create divots in your piece if you lift up on your piece as you feed it in.
Posts: 3,859
Threads: 0
Joined: Nov 2000
I love it. I enjoyed some of your other videos too.
Posts: 6,442
Threads: 0
Joined: Feb 2006
very cool. welcome to the forum!
Posts: 813
Threads: 0
Joined: May 2007
Location: Jackson, WY
Hi Paul,
Welcome aboard. I like your site and especially the kayak designs. Building a kayak is on my bucket list.
As far as the sander I need to make one to tide me over till I can find space for a bigger one. I am not sure if all belt sanders have this but my 20 year old one has a handle hole on either side. There is a hole that goes all the way through the belt sander. I used it to put a hanger bolt all the way through it. It has wood threads on one side and a machined bolt on the other side. You can use it to mount the belt sander to board and hold it into place.
A carpenter's house is never done.
Posts: 1,084
Threads: 0
Joined: Mar 2006
(02-13-2018, 11:59 PM)paulmon Wrote: I recently made a jig that fits on my belt sander and allows me to thickness sand wood right down to veneer. Although it can only do wood up to the width of the belt, it also didn't cost $1200.
I don't try to sell plans or anything, but I'm sure the clever people here can figure it out easily enough. I made a video that can be seen here:
https://youtu.be/BaozDNHvEns
Cheers,
Paul M
http://openwoodshop.com
Excellent Thanks
Posts: 233
Threads: 0
Joined: Dec 2010
(02-13-2018, 11:59 PM)paulmon Wrote: I recently made a jig that fits on my belt sander and allows me to thickness sand wood right down to veneer. Although it can only do wood up to the width of the belt, it also didn't cost $1200.
I don't try to sell plans or anything, but I'm sure the clever people here can figure it out easily enough. I made a video that can be seen here:
https://youtu.be/BaozDNHvEns
Cheers,
Paul M
http://openwoodshop.com
All we need now is some smart guy to figure out how to take apart a belt sander and add large rollers to it. Then they could enlarge your design. Mattias used a screw gun for a power feeder!
RP
Posts: 18,497
Threads: 0
Joined: Jul 2006
Location: Milwaukee area
Yep, great site, keep 'em coming.
