The new Mikiespace - 40X64X16 Pole Barn
#2 is up

[Image: IMG_20180519_201407_01_zpsj7jsyttm.jpg]


Glad its my shop I am responsible for - I only have to make me happy.

Reply
Did you install a variable speed switch or a regular on/off
Steve

Mo.



I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24


 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
(05-20-2018, 07:59 PM)Stwood_ Wrote: Did you install a variable speed switch or a regular on/off

The fans have an RF remote. It has 4 dip switches so you can program the remote up to 16 different frequencies. The fans require a disconnect to allow the remote frequency to pair with a fan. I am just using the remotes and not hardwired wall switches. I just wired them to four of ceiling 120V circuits.

The fans have 6 remote selectable speeds and you can also reverse direction and shut them off from the remote. So all individually controlled with 6 speeds and reverse.\
As soon as I figure out the frequency on them, if I can bridge that to wifi, I will automate that with a phone app and/or amazon echo. For now the remotes work just fine and I really don't plan to change the direction or speed much. Set it and forget it till winter.


BTW - fans three and four are up.

[Image: MVIMG_20180520_230759_zpswt6pgzjm.jpg]


Glad its my shop I am responsible for - I only have to make me happy.

Reply
(05-21-2018, 07:40 AM)BloomingtonMike Wrote: BTW - fans three and four are up[Image: MVIMG_20180520_230759_zpswt6pgzjm.jpg]

It just keeps getting better and better.  Where's the sauna going? 
Smile
Credo Elvem ipsum etiam vivere
Non impediti ratione cogitationis
Reply
(05-21-2018, 12:39 PM)Admiral Wrote: It just keeps getting better and better.  Where's the sauna going? 
Smile

Would you believe the neighbor offered me a free hot tub LOL. Not sure I want it!!


Glad its my shop I am responsible for - I only have to make me happy.

Reply
Anyone need some plywood? I am ready to sell some extra.


Glad its my shop I am responsible for - I only have to make me happy.

Reply
Latest update.

Installed mini blinds on doors and windows and got rid of insulation covering them.

Got the cnc mill's air and power run to ceiling and got it back up and running. Also got the 1340 metal lathe moved ove.

[Image: IMG_1527355836923_zpsytdwwwex.jpg]


Glad its my shop I am responsible for - I only have to make me happy.

Reply

Cool 

Hey I see a grease spot on the floor....
Steve

Mo.



I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24


 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
Grease, oil, rust water, wd40 popcorn oil, whatever it takes.


Glad its my shop I am responsible for - I only have to make me happy.

Reply
Got some metal tools cleaned up and moved in the new shed. Got their above tool access power and air lines ran to them. No cords on the floor.

[Image: MVIMG_20180528_141818_zpscl1c8mqd.jpg]

[Image: MVIMG_20180528_141842_zpslazvllmk.jpg]

[Image: IMG_20180528_141851_zpsq8yndei4.jpg]

[Image: MVIMG_20180528_141900_zps6mxzdgsu.jpg]

[Image: MVIMG_20180528_141908_zpsfdl3i3zh.jpg]


Glad its my shop I am responsible for - I only have to make me happy.

Reply


Forum Jump:


Users browsing this thread: 3 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.