Posts: 4,003
Threads: 0
Joined: Nov 2010
Show me a picture, I'll build a project from that
Posts: 4,003
Threads: 0
Joined: Nov 2010
Still working on an ID for the eggbeaters....the two breast drills? One is a Jordan France....the other is a Goodell-Pratt, with a label on the grear wheel. The chain drill? Also a Goodell-Pratt,,,,single patent date.
Was also gifted with this box....red package it an 80" bandsaw blade, 15tpi, from Sears. That little chuck? You add that to about any brace drill, and then use small twist drills, like for pilot holes.
And a stack of hardwood flooring cutoffs....will see what I can cobble up from them. That wooden jack plane? Needs a tapered single iron. Also has a split right down the center line..
Swag bag from Laguna, EWT, and Woodcraft....not too bad of a day....
Show me a picture, I'll build a project from that
Posts: 3,017
Threads: 1
Joined: Aug 2009
Quite the party you went to!
Posts: 19,999
Threads: 0
Joined: Jul 2003
Posts: 4,003
Threads: 0
Joined: Nov 2010
Ok...ID for a couple of the drills...so far..
Goodell-Pratt No. 329 double pinnon eggbeater
The Goodell-Pratt Breast drill...
With label on the gear wheel....
Is stamped on the crank handle as a No. 0477....
Cleaned this thing up...
Is stamped on the chuck as a Goodell-Pratt. Along with a single patent date.
Slowly getting things cleaned up, and an ID for each....
Show me a picture, I'll build a project from that
Posts: 4,003
Threads: 0
Joined: Nov 2010
Mystery drill. Has stamped onto the Crank handle...
Either "Jordan" or Jordin? and FRANCE.....looks like OEM Paint was a dark blue?
Two speed, the gears sit in an enclosed area....used to be a ball bearing thrust washer.....most of the balls had fallen out....
The drill behind it is a Millers Falls No. 120, so this "French Drill" is a biggie. Not much else to go on...
Show me a picture, I'll build a project from that
Posts: 90
Threads: 0
Joined: Aug 2018
That's a nice haul. Great looking old tools in there.
Posts: 3,471
Threads: 0
Joined: Dec 2006
Location: Sugar Land, TX
(08-28-2018, 01:34 PM)Enigmatic Wrote: That's a nice haul. Great looking old tools in there.
Welcome to the forum!!!
Skip
Posts: 90
Threads: 0
Joined: Aug 2018
(08-28-2018, 01:38 PM)Skip J. Wrote: Welcome to the forum!!!
Thanks.
Posts: 9,459
Threads: 0
Joined: Dec 2004
That WR looks sweet! Congrats.
Glad its my shop I am responsible for - I only have to make me happy.
