Posts: 16,604
Threads: 0
Joined: Oct 2002
Location: Ra-cha-cha, NY
09-04-2018, 01:37 PM
(This post was last modified: 09-04-2018, 02:29 PM by TDKPE.)
Tom
“This place smells like that odd combination of flop sweat, hopelessness, aaaand feet"
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
Looks like a fan used in a greenhouse. We had 2 of those when our greenhouse was up.
They move a lot of air, with just a 1750 motor.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 24,334
Threads: 0
Joined: Feb 2002
Location: Elizabethtown, KY
Got the last of the wall insulation hung today. I was going to use a contractor to glue cellulose to the walls but after 3-4 days of getting a busy signal I figured that doing it myself was the best idea. I still hope to find a contractor to spray foam on the ceiling both for heat/cool insulation but also to cut the noise down when it rains/hails, etc.
Tomorrow I hope to weld up the man-door frame and see about getting the final inspection done so I can start moving stuff in.
Something LOML is frequently suggesting as a good idea
"Truth is a highway leading to freedom" --Kris Kristofferson
Wild Turkey
We may see the writing on the wall, but all we do is criticize the handwriting.
(joined 10/1999)
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
Welding up a man door frame?? Your crew did not frame in a walk-in door?
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 24,334
Threads: 0
Joined: Feb 2002
Location: Elizabethtown, KY
(09-13-2018, 01:36 PM)Stwood_ Wrote: Welding up a man door frame?? Your crew did not frame in a walk-in door?
Framed it, but it's a commercial door I picked up at an auction for $10 several years ago and the only door jamb set I could find was nearly $200.
Two sticks of angle iron and an hour's welding and I'll have a much stouter frame
"Truth is a highway leading to freedom" --Kris Kristofferson
Wild Turkey
We may see the writing on the wall, but all we do is criticize the handwriting.
(joined 10/1999)
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
...................
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
