01-15-2019, 12:15 PM (This post was last modified: 02-03-2019, 10:28 PM by Jack01.)
Save money by making your own Beadlock® loose tenon stock - just raid your scrap bin for material. Featuring precision-machined carbide flutes, this bit trims stock to 3/8" widths for a perfect match to your 3/8" Beadlock® mortise. Its sturdy 1/2" shank ensures minimal vibration. You can stock up by running long lengths and cutting off tenons as needed, or you can just run a few short pieces for a small project. With Beadlock® Router Bits, the choice is yours!
(01-15-2019, 12:15 PM)Jack01 Wrote: Save money by making your own Beadlock® loose tenon stock - just raid your scrap bin for material. Featuring precision-machined carbide flutes, this bit trims stock to 3/8" widths for a perfect match to your 3/8" Beadlock® mortise. Its sturdy 1/2" shank ensures minimal vibration. You can stock up by running long lengths and cutting off tenons as needed, or you can just run a few short pieces for a small project. With Beadlock® Router Bits, the choice is yours!
1/2" shank for minimal vibration.
Approximately 3-1/2" long overall.
Carbide length: about 1-3/4".
Ultra-fine grade K20 tungsten carbide.
$ 35 plus shipping
---BUMP----
You can make your own tenons and save money.
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
