Posts: 4,133
Threads: 0
Joined: Oct 2009
Location: Lawrence, KS
(02-10-2019, 07:26 PM)museumguy Wrote: Interesting topic. Anyone use one of these to spay shellac ? https://www.harborfreight.com/20-fl-oz-h...62300.html
They come on sale for $9.99 once in a while.
It is my understanding that they have a 2.0mm needle/nozzle or thereabouts. Maybe 1.8mm. At any rate, that's generally a bit big for shellac. I use 1.3mm for 2# cut in a 4-stage HVLP turbine. You could use 1.0mm too, but I usually leave the 1.3mm installed because that works pretty well for most clear finishes I use.
Don't sweat the petty things and don't pet the sweaty things. -- G. Carlin
Posts: 11,668
Threads: 0
Joined: Dec 2006
(02-10-2019, 07:26 PM)museumguy Wrote: Interesting topic. Anyone use one of these to spay shellac ? https://www.harborfreight.com/20-fl-oz-h...62300.html
They come on sale for $9.99 once in a while.
Yes, those will spray shellac just fine. They have a general purpose 1.5 tip and shellac flows and shoots fine through them. Shellac is super easy to spray depending on the "cut". My typical routine is to shoot 4-5 thin coats of shellac and after allowing it to fully dry, I rub it out with furniture wax and a synthetic abrasive polishing pad.
Posts: 12,888
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
(02-10-2019, 10:31 PM)Rob Young Wrote: It is my understanding that they have a 2.0mm needle/nozzle or thereabouts. Maybe 1.8mm. At any rate, that's generally a bit big for shellac. I use 1.3mm for 2# cut in a 4-stage HVLP turbine. You could use 1.0mm too, but I usually leave the 1.3mm installed because that works pretty well for most clear finishes I use.
The HF purple guns have a 1.4 mm needle and are perfect for spraying shellac, dyes, etc. They are an incredible bargain for $10.
John
Posts: 286
Threads: 0
Joined: Apr 2012
Yes, the HF sprayers are a bargain! I take mine apart and clean it carefully, but my cabinet builder friend, tosses them after just one use. He’s to busy to spend 20 cleaning it.
Posts: 1,289
Threads: 0
Joined: Sep 2012
Location: Mobile, Alabama
I agree with all the above comments. However, to answer more directly, yes an airbrush will spray shellac nicely. I currently have a project going where I'm doing just that with my Badger airbrush. I'm using a 1# cut and the largest tip. I don't know the actual size. I don't know anything about the HF airbrush, but for the price, it might be fun to try.
Posts: 7,421
Threads: 1
Joined: Sep 2005
No animals were injured or killed in the production of this post.
