Posts: 2,035
Threads: 0
Joined: Jan 2003
Found this drill bit in with some garage sale auger bits. I've never seen one like it, This one is for drilling a hole about 3/8" diameter. It is similar to a fortsner bit but with the auger for removing waste. It's pretty small, and will cut but kind of dull. How would you sharpen it? Thanks
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
Better pics would help.
Third pic, looks like it fits in a brace?
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 2,035
Threads: 0
Joined: Jan 2003
It does fit into a brace. Sorry about the pics.
Posts: 13,412
Threads: 4
Joined: Jun 2007
Location: New Jersey
02-28-2019, 09:24 PM
(This post was last modified: 03-01-2019, 10:50 AM by Admiral.)
Wow, two weirdo tools in a row. My best guess is a hollow auger for dowels.
Edit: no, I'm full of chit, that's not right. Agree with Stwood's id below.
Credo Elvem ipsum etiam vivere
Non impediti ratione cogitationis
Posts: 3,017
Threads: 1
Joined: Aug 2009
The number of variations manufacturers have come up with over the last century and a half, since the explosion of Good Ideas Not All of Which Worked Out started, would be hard to calculate. I suspect you've got one of those.
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
(02-28-2019, 09:02 PM)toolmiser Wrote: It does fit into a brace. Sorry about the pics.
I'm on a different computer at the moment, and the pic is a tad clearer.
Seems to be a forester type bit.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 116,083
Threads: 0
Joined: Jun 2002
Location: Sparkling Clearwater, Fl. Tampa Bay Area
(03-01-2019, 10:19 AM)Stwood_ Wrote: I'm on a different computer at the moment, and the pic is a tad clearer.
Seems to be a forester type bit. ,,,,,,,,,,,,,,
My take as well.....Looks like it is intended for deep drilling, because it is fluted to eject the chips, unlike ordinary forschners..But I could be wrong...
Often Tested. Always Faithful. Brothers Forever
Jack Edgar, Sgt. U.S. Marines, Korea, America's Forgotten War
Get off my lawn !
Posts: 691
Threads: 0
Joined: Apr 2003
(03-01-2019, 01:59 PM)Timberwolf Wrote: ,,,,,,,,,,,,,,
My take as well.....Looks like it is intended for deep drilling, because it is fluted to eject the chips, unlike ordinary forschners..But I could be wrong...
Ditto, Had some back in the old pattern shop. Went up to about 3/4 dia in that style
Posts: 2,035
Threads: 0
Joined: Jan 2003
How would I attempt to sharpen it. Small needle file from the inside?
Posts: 154
Threads: 0
Joined: Jan 2014
|
