How would you oscillate this?

[®smpr_fi_mac®]

I have a 220V squirrel cage that came from an air conditioning unit that I want to use in my shop with summer coming. It moves some serious air. I can mount it on a platform that allows me to manually position it but I'm interested in fabbing some sort of mount that will allow it to oscillate through 140* or so.

Any thoughts?

[cams2705]

THIS

[6270_Productions]

Hang it from the ceiling by a 5 foot long 1/2" diameter nylon rope.

It will move around on its own - much more than the desired 140 degrees - probably.

[Timberwolf]

Hang it from the ceiling by a 5 foot long 1/2" diameter nylon rope.

It will move around on its own - much more than the desired 140 degrees - probably.

.......................
I'd like to watch that!!!!!

[Roly]

Remember to check the amperage draw against nameplate full load amps.  Without some air restriction it may be overloaded.   Roly

[6270_Productions]

.......................
I'd like to watch that!!!!!

I would recommend a distance of slightly more than 5 feet.

[®smpr_fi_mac®]

THIS

That's too simple!

Hang it from the ceiling by a 5 foot long 1/2" diameter nylon rope.

It will move around on its own - much more than the desired 140 degrees - probably.

That might be fun.

Remember to check the amperage draw against nameplate full load amps.  Without some air restriction it may be overloaded.   Roly

I'll likely put a filter or two over it so it can double as a windstorm AND fine dust collection.

[Arlin Eastman]

Cripes you are not thinking right grasshopper.

Have your wife hold it and tell here to move around for your best comfort.

[Bill Holt]

Oh the things an ole leather neck has to endure.

[Roly]

Cripes you are not thinking right grasshopper.

Have your wife hold it and tell here to move around for your best comfort.

Make sure all sharp corners are removed.   We all know where it would wind up  
    Roly