Posts: 24,331
Threads: 0
Joined: Feb 2002
Location: Elizabethtown, KY
Not mine but I though someone here might be looking.
![[Image: 00000_4a0CbKqkFtY_1200x900.jpg]](https://images.craigslist.org/00000_4a0CbKqkFtY_1200x900.jpg)
Quote:Northfield #1table saw. 5 HP, 3 phase, 16” blade. 3.5” doc, 4.5” with 18” blade. Includes Beismeyer fence with 60” crosscut capability. Also includes auxiliary sliding table. 1200 # of cast iron. Saw is only one of 355 produced. It does have a vintage aspect as it was made in 1946. It can be seen under power. Table was recently reground flat. Table tilts for angular cuts. It also goes up and down for blade height. A piece of history ready to go.
https://louisville.craigslist.org/tls/d/...44572.html
"Truth is a highway leading to freedom" --Kris Kristofferson
Wild Turkey
We may see the writing on the wall, but all we do is criticize the handwriting.
(joined 10/1999)
Posts: 12,605
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
Wow, can you imagine trying to tilt that table??? But it really does look neat.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 832
Threads: 0
Joined: Apr 2009
Location: Pacifc North Wet --AKA WA
Posts: 159
Threads: 0
Joined: Jan 2010
11-17-2019, 06:10 PM
(This post was last modified: 11-17-2019, 06:12 PM by aquaticjim.)
(11-17-2019, 02:33 PM)Ray Newman Wrote: Be still my heart....
It is neat but a tilting table saw does not have a lot of value. They are difficult to make cuts unless the table is flat. In this case, the sliding table attachment would have to be removed every time you wanted to make a bevel cut. I have seen other other old tilting top table saws at auctions and no one really bids on them.
Posts: 1,565
Threads: 0
Joined: Nov 2005
Location: Mid, MI.
The problem I see is its so heavy it cracked the concrete.
Posts: 832
Threads: 0
Joined: Apr 2009
Location: Pacifc North Wet --AKA WA
AquaticJim: agree with what you said and I knew of the "limitations" before hand. But to have that in my shop we call for some serious "braggin' rights"....
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
(11-17-2019, 08:43 PM)fall Wrote: The problem I see is its so heavy it cracked the concrete.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
It would take a big shop to use it. I am just wondering if small 1/4 hp motors can be installed to raise up the table and other parts which would make it a lot easier to use.
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 2,553
Threads: 0
Joined: Dec 2002
Location: Southwest, Iowa, USA
(11-17-2019, 12:07 PM)Wild Turkey Wrote: Not mine but I though someone here might be looking.
. . . snip
"Looking?"
I can see that thing from clear up here.
I think you could even see if from outer space.
Know Guns. Know Security. Know Freedom - - - No Guns. No Security. No Freedom
Guns are supposed to be dangerous. If yours is not dangerous you need to take it to a gunsmith and have it repaired.
Posts: 215
Threads: 0
Joined: Mar 2005
16" blade. 20/4 here we come.
