Posts: 2,560
Threads: 0
Joined: Dec 2002
Location: Southwest, Iowa, USA
(09-29-2020, 08:12 AM)Admiral Wrote: Great story. I write business and legal documents for a living and have been trying for years to bury the word "Merkin" into one, but it has to be in context and make sense. No success yet.
Want me to get my wife to working on it?
Know Guns. Know Security. Know Freedom - - - No Guns. No Security. No Freedom
Guns are supposed to be dangerous. If yours is not dangerous you need to take it to a gunsmith and have it repaired.
Posts: 13,485
Threads: 0
Joined: Oct 1999
Just buy a new belt.
If Klingspor can’t sell you a replacement, 2Sand.com can custom make any size belt.
The tape on sanding belts is NOT forever. Belts have a shelf life, after which they are subject to early tape failure.
Posts: 2,037
Threads: 0
Joined: Jan 2003
Isn't there some kind of mesh belt, or something that isn't abrasive paper? Has anyone had any experience with them?
Posts: 7,421
Threads: 1
Joined: Sep 2005
09-30-2020, 02:24 PM
(This post was last modified: 09-30-2020, 02:25 PM by Cooler.)
Can you "stitch" (or lace it) it together using fishing line?
It turns out that there are many kits out there for repairing conveyor belts. Most seem to use "staples".
https://www.google.com/search?client=fir...repair+kit
No animals were injured or killed in the production of this post.
Posts: 5,657
Threads: 0
Joined: May 2005
Location: Centre County Pennsylvania
I think most conveyor belt applications don't have a problem with a little bump on the once-around. Seems like that would cause a problem with a sander
Posts: 12,610
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
(10-03-2020, 09:50 PM)EricU Wrote: I think most conveyor belt applications don't have a problem with a little bump on the once-around. Seems like that would cause a problem with a sander
I'll bet they do, I would think that even a little bump in the belt would lift the work piece into the sanding drum slightly.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 5,657
Threads: 0
Joined: May 2005
Location: Centre County Pennsylvania
I was trying to say that sanding conveyors shouldn't have a bump like the one that would come with staples.
Posts: 12,610
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
(10-04-2020, 09:13 PM)EricU Wrote: I was trying to say that sanding conveyors shouldn't have a bump like the one that would come with staples.
Gotcha, didn't read carefully enough (again). Sorry.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 16,471
Threads: 0
Joined: Mar 2005
(09-28-2020, 09:11 PM)6270_Productions Wrote: Years later in a letter to the battalion commander after my retirement I explained to him about the serial number on his "thanks for being here" gift from the battalion and hand-built by me. My chance of going from E-6 to E-7 were zero - 6270.
I comfort myself with the idea he gets to think about that every time he sees that gift sitting on his shelf.
Yea, I am just that kind of guy.
I love it!
...
See ya later,
Bill
Posts: 2,560
Threads: 0
Joined: Dec 2002
Location: Southwest, Iowa, USA
(10-07-2020, 09:13 AM)Bill_de Wrote: I love it!
...
I would bet the Commander does not
- but I really don't care.
Know Guns. Know Security. Know Freedom - - - No Guns. No Security. No Freedom
Guns are supposed to be dangerous. If yours is not dangerous you need to take it to a gunsmith and have it repaired.
