Posts: 21,881
Threads: 0
Joined: Oct 2003
12-28-2020, 07:59 PM
(This post was last modified: 12-28-2020, 08:43 PM by Gary G™.)
Need a replacement Shaft-Roller for the jigsaw.
Part Number: 695778
Online says it’s discontinued.
I used a small bolt with nylon lock nut for a temp fix.
It’s not hardened enough; it wore out.
Ideas where a replacement might be had? Ace maybe?
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Posts: 769
Threads: 0
Joined: Jan 2007
Location: ATL
try abearing supply house . I can't imagine PC used something special or proprietary for this .
Posts: 21,881
Threads: 0
Joined: Oct 2003
Thanks.........17
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Posts: 1,491
Threads: 0
Joined: Apr 2003
Location: Farmington, MN
(12-28-2020, 07:59 PM)Gary G™ Wrote: Need a replacement Shaft-Roller for the jigsaw.
Part Number: 695778
Online says it’s discontinued.
I used a small bolt with nylon lock nut for a temp fix.
It’s not hardened enough; it wore out.
Ideas where a replacement might be had? Ace maybe?
My local Ace has a good selection of miscellaneous hardware - I've picked up oddball stuff like this from them quite often. A few times I've been able to upgrade to a higher grade bolt than OEM to fix a situation like this. Definitely worth trying - it might be the easy button.
MKM - Master Kindling Maker
Posts: 1,383
Threads: 0
Joined: Sep 2007
(12-28-2020, 07:59 PM)Gary G™ Wrote: Need a replacement Shaft-Roller for the jigsaw.
Part Number: 695778
Online says it’s discontinued.
I used a small bolt with nylon lock nut for a temp fix.
It’s not hardened enough; it wore out.
Ideas where a replacement might be had? Ace maybe?
Try here:
http://www.northcantonrepairshop.com
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
(12-28-2020, 07:59 PM)Gary G™ Wrote: Need a replacement Shaft-Roller for the jigsaw.
Part Number: 695778
Online says it’s discontinued.
I used a small bolt with nylon lock nut for a temp fix.
It’s not hardened enough; it wore out.
Ideas where a replacement might be had? Ace maybe?
https://www.ebay.com/c/671335040
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
