01-18-2021, 11:50 AM (This post was last modified: 01-18-2021, 05:37 PM by pjohnson.)
On my to do list for many years has been an extension table for my saw.
I finally got around to putting it together. The extension will bolt to existing holes in my fence and butt up against my outfeed table. It is made from poplar and melamine. The hardware is 1/4” bolts, nuts/washers, and t-nuts.
My objective today is to cut the mitre slots and get it mounted. I will post updates pics when it is complete.
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
