Posts: 6,442
Threads: 0
Joined: Feb 2006
I'll be building some kitchen cabinets (poplar frames and MDF panels) and am interested in getting a gloss/factory looking finish and have recently learned of pre-catalyzed lacquer. Can a DIY/Hobby woodworker be successful spraying this in a 2 car garage or are there all kinds of explosion proof vent systems (etc) required, etc..
Thanks for any insights before I go down this path!
Posts: 769
Threads: 0
Joined: Jan 2007
Location: ATL
I suggest a waterborne 2k coating instead.
Posts: 6,442
Threads: 0
Joined: Feb 2006
(08-01-2021, 09:17 AM)Cabinet Monkey Wrote: I suggest a waterborne 2k coating instead.
Thanks. for what reasons?
Posts: 12,606
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
Well, there's real precat lacquer, and there's some water borne versions that label themselves pre cat lacquer. If you're thinking of pre cat solvent based lacquer, there's just as many (maybe more) precautions that need to be taken as there would be with NC lacquer. Whether it could be sprayed safely in a garage is an opinion, and mine would be No. I only spray solvent lacquers when I can do so outside.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 508
Threads: 0
Joined: Jan 2006
It's no different than regular nitro lacquer. I spray all the time in a two car garage with door open in warmer months and even spray in winter, but keep session short and open garage door while spraying. I turn off electric heater right before opening the garage door. Let the overspray fumes vent out for a few minutes then close the door and turn heater back on.
Posts: 12,197
Threads: 2
Joined: Nov 1999
Location: Nebraska City
(08-01-2021, 01:11 PM)fredhargis Wrote: Well, there's real precat lacquer, and there's some water borne versions that label themselves pre cat lacquer. If you're thinking of pre cat solvent based lacquer, there's just as many (maybe more) precautions that need to be taken as there would be with NC lacquer. Whether it could be sprayed safely in a garage is an opinion, and mine would be No. I only spray solvent lacquers when I can do so outside.
I sprayed gallons and gallons Sherwin Williams pre-cat in the garage, with a floor fan blowing out the door. Respirator is certainly a good idea, altough I didn't always us it.
