Posts: 3,278
Threads: 0
Joined: Feb 2005
Location: Cleveland, OH
(10-11-2021, 09:24 PM)atgcpaul Wrote: We have a fairly blah concrete walkway that leads from our driveway to our blah front entrance which is a covered concrete porch.
All the concrete is in very good condition. To dress it up, we want to cover the concrete with thin (1") brick. We do get ice and snow in MD. Anyone done this themselves or hired a pro? Lessons learned? Approximately how much per sqft?
Thanks
Paul
I just noticed you're in Central America...so yeah...I don't think you'll have to worry about snow clearing
I'd clean the existing concrete as best you can, and then use a construction adhesive to set the outside "solider" course. Set the field, add polymeric sand and plate vibrate it in. Water it and be done. Price is going to be largely dependent on the pavers and the pattern in which you lay them.
If you want a pro's opinion...reach out to 2beast here...he's a wealth of knowledge.
Posts: 64,647
Threads: 3
Joined: Feb 2007
Location: Merryland
10-13-2021, 08:34 AM
(This post was last modified: 10-13-2021, 08:36 AM by Snipe Hunter.)
We had an ugly concrete front porch at the old house. I put pavers over it, glued them down with landscape block adhesive. I don't like her color choice but I never do.. I just follow orders. I'm about to do it again at our new house and will be gluing them down over ugly and sloppily installed terracotta tile on our new front porch. I sweep in Polymeric Sand in the gaps between the pavers. Several different color and size choices.
These are the pavers "Patio on a pallet"
![[Image: 34mXcun.jpg]](https://i.imgur.com/34mXcun.jpg)
Posts: 2,273
Threads: 3
Joined: Feb 2005
Location: Central America
(10-12-2021, 08:41 PM)brnhornt Wrote: I just noticed you're in Central America...so yeah...I don't think you'll have to worry about snow clearing
We are but only temporarily. Our house is in Maryland.
(10-12-2021, 08:38 PM)brnhornt Wrote: Just my two cents...but I have a paver walkway set in a running bond over an old concrete walkway. Never had a problem walking my two stage blower over it. My neighbor has a smaller one stage blower and his never has a problem with it either (when he does a good turn in the winter and gets to my walkway before I do.)
I laid interlocking pavers at our old MD house and clearing snow with a shovel wasn't really a problem, but what we're looking to do is laying a brick walkway with wider joint lines so I get that clearing snow could be a problem. My wife is trying to rationalize that if it does snow, we'll direct people to a different entrance but she also doesn't do any of the snow clearing
) I told her to stop looking at Pinterest. That didn't go over well.
Posts: 2,273
Threads: 3
Joined: Feb 2005
Location: Central America
(10-13-2021, 08:34 AM)Snipe Hunter Wrote: We had an ugly concrete front porch at the old house. I put pavers over it, glued them down with landscape block adhesive. I don't like her color choice but I never do.. I just follow orders. I'm about to do it again at our new house and will be gluing them down over ugly and sloppily installed terracotta tile on our new front porch. I sweep in Polymeric Sand in the gaps between the pavers. Several different color and size choices.
These are the pavers "Patio on a pallet"
Our porch looks very similar to this. The compromise might be to cover the concrete porch with thin brick and skip the walkway, or punt on the walkway now and possibly later rip it out for pavers. How thick are those pavers? Looks like 1 1/2" or thereabouts.
What's the max height for a step? The porch is a small step up from the walkway so I think I'm still OK with a 1" brick and adhesive/mortar. The height will then be reduced stepping into the house from the porch. Does code treat that porch as a "step" so it has to fall within a certain interval like stair treads do even though the porch is ~6-8' deep?
Posts: 917
Threads: 0
Joined: Sep 2008
Don't know about the laws where you are, but in WI. the rules apply. 8" maximum rise with a minimum 9" tread width.
Posts: 3,278
Threads: 0
Joined: Feb 2005
Location: Cleveland, OH
(10-13-2021, 10:13 AM)atgcpaul Wrote: We are but only temporarily. Our house is in Maryland.
I laid interlocking pavers at our old MD house and clearing snow with a shovel wasn't really a problem, but what we're looking to do is laying a brick walkway with wider joint lines so I get that clearing snow could be a problem. My wife is trying to rationalize that if it does snow, we'll direct people to a different entrance but she also doesn't do any of the snow clearing
) I told her to stop looking at Pinterest. That didn't go over well.
Ah...gotcha.
But even with the wider joints...wouldn't you still just fill them with polymeric sand?
Posts: 64,647
Threads: 3
Joined: Feb 2007
Location: Merryland
(10-13-2021, 10:29 AM)atgcpaul Wrote: Our porch looks very similar to this. The compromise might be to cover the concrete porch with thin brick and skip the walkway, or punt on the walkway now and possibly later rip it out for pavers. How thick are those pavers? Looks like 1 1/2" or thereabouts.
What's the max height for a step? The porch is a small step up from the walkway so I think I'm still OK with a 1" brick and adhesive/mortar. The height will then be reduced stepping into the house from the porch. Does code treat that porch as a "step" so it has to fall within a certain interval like stair treads do even though the porch is ~6-8' deep?
Yep, they're patio Pavers.
