Posts: 19,107
Threads: 0
Joined: Jul 2008
Location: Free At Last!
My collection of Revos spans about a decade. The latest ones have the hex bolt in the handle, which I like quite a bit. I've been searching around and you can't just buy the handle/screw, you have to buy the full head for $30/ea.
Has anyone been able to source just the handle/screw with the update or fashion some other way to make tightening/loosening the clamps easier?
Posts: 2,399
Threads: 0
Joined: Dec 2011
The joinery is the problem, not the clamp handle. There shouldn't be a need to use a socket wrench to tighten the clamp when a joint is properly made. The bessey clamp as designed exerts more than enough force for a wooden joint. If your need is to have a better purchase on the handle, try hockey tape.
Simon
Posts: 19,107
Threads: 0
Joined: Jul 2008
Location: Free At Last!
Just simple edge joints. The joints have been fine, but I thought it might be an easier way to crank down on the handle.
Posts: 12,674
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
My older ones (with the red slippery wood handles) all have either the Rockler foam grip or some friction tape wrapped around them. I agree the newer handles would be nice to have on all the clamps, but like you said...it ain't easy or cheap to do.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 4,333
Threads: 0
Joined: Feb 2001
(12-31-2021, 10:46 PM)Handplanesandmore Wrote: The joinery is the problem, not the clamp handle. There shouldn't be a need to use a socket wrench to tighten the clamp when a joint is properly made. The bessey clamp as designed exerts more than enough force for a wooden joint. If your need is to have a better purchase on the handle, try hockey tape.
Simon
I hate to admit it, but I agree with Simon. Even the least expensive Bessey clamps should be able to apply enough pressure
Tom
Posts: 5,369
Threads: 0
Joined: Jan 2014
Location: Santa Maria, Ca
Joinery is key, I agree. There are times though, that you need to tighten/loosen, etc and they just don't
want to cooperate. Arthritic hands, or whatever.
I have a scrap of non slip tool drawer liner that I keep near the clamp storage rack. Adaptable for every
clamp/situation.
Mark Singleton
Bene vivendo est optimum vindictae
The Laws of Physics do not care about your Politics - Me
Posts: 4,333
Threads: 0
Joined: Feb 2001
(01-01-2022, 11:27 AM)MarkSingleton Wrote: Joinery is key, I agree. There are times though, that you need to tighten/loosen, etc and they just don't
want to cooperate. Arthritic hands, or whatever.
I have a scrap of non slip tool drawer liner that I keep near the clamp storage rack. Adaptable for every
clamp/situation.
I agree with that also. I have arthritics in my thumbs. I use the drawer liners myself especially on my wood only K clamps. But I am not sure if that amounts to more clamping pressure or getting the clamping pressure one used to be able to get. There seems to be a thin line between getting enough clamping and starving a glue joint because of clamping pressure.
Tom
Posts: 22,330
Threads: 0
Joined: Dec 2005
Location: Oakdale, MN
(12-31-2021, 07:48 PM)lincmercguy Wrote: My collection of Revos spans about a decade. The latest ones have the hex bolt in the handle, which I like quite a bit. I've been searching around and you can't just buy the handle/screw, you have to buy the full head for $30/ea.
Has anyone been able to source just the handle/screw with the update or fashion some other way to make tightening/loosening the clamps easier?
Wrap the handles in hockey tape.
https://www.amazon.com/Renfrew-Cloth-Hoc...192&sr=8-3
Once Favre hangs it up though, it years of cellar dwelling for the Pack. (Geoff 12-18-07)
Posts: 7,319
Threads: 1
Joined: Mar 2004
Location: Western Colorado
(01-01-2022, 10:09 PM)packerguy® Wrote: Wrap the handles in hockey tape.
https://www.amazon.com/Renfrew-Cloth-Hoc...192&sr=8-3
Right. And watch this two minute
'spin the tape' method for even better grip.
Posts: 4,333
Threads: 0
Joined: Feb 2001
Thank you both for the short video on how to wrap the handle as well as where to get it. Most helpful. It will be much easier to wrap my handles once than having to find my pieces of drawer liner.
Tom
