Posts: 122
Threads: 0
Joined: Nov 2004
Looking for a dust collector. Mine finally bit the dust. Cost of motor repair or replacement is more than buying a new H. Freight DC but I thought I'd see if there was something used before going that route.
Prefer 1.5 to 2hp. 110v or 220v single phase.
Thanks
Ricc
Posts: 1,625
Threads: 0
Joined: Feb 2003
There is a Jet 650M with a cartridge filer on FB marketplace in Carmel for $650. Not mine but I try to keep my eye out for deals on FB.
Posts: 122
Threads: 0
Joined: Nov 2004
(03-17-2022, 07:28 PM)ajkoontz Wrote: There is a Jet 650M with a cartridge filer on FB marketplace in Carmel for $650. Not mine but I try to keep my eye out for deals on FB.
I was hoping to find something with more CFM and HP as that only is a 1hp unit. And, hopefully a deal for a little less money as I am on disability. But, I will take a look.
THANKS
Ricc
Posts: 482
Threads: 0
Joined: Apr 2011
I think your best bet is the HF with the Win filter. I know you said you were on a budget so you could.buy the HF DC and use it right away, then save for the WIN filter upgrade IMHO.
Posts: 122
Threads: 0
Joined: Nov 2004
(03-19-2022, 09:47 AM)mike9 Wrote: I think your best bet is the HF with the Win filter. I know you said you were on a budget so you could.buy the HF DC and use it right away, then save for the WIN filter upgrade IMHO.
Mike, That's kind of my plan. But, I thought I would check here first to see if someone had a used HF or Grizzly and were getting rid of it for some reason lie retiring, downsizing, etc.
Posts: 21,517
Threads: 2
Joined: Mar 2009
Location: IA
Ric
Did you see michials clearvue in S&S and at a heck of a price
As of this time I am now teaching vets again. If you have any lumber scraps we can use them to glue up to make some bowl from a board. Thank You
It is always the right time, to do the right thing.
Posts: 122
Threads: 0
Joined: Nov 2004
(03-23-2022, 06:11 PM)Arlin Eastman Wrote: Ric
Did you see michials clearvue in S&S and at a heck of a price
Arlin,
yes but it doesn't make sense as it's too far away in TX and I and in Northern Indiana. Plus, it's a little out of my budget.
Posts: 122
Threads: 0
Joined: Nov 2004
Posts: 3,156
Threads: 1
Joined: Jan 2005
Location: Northern Ohio
(04-02-2022, 08:34 AM)Ricc Havens Wrote: one last bump
PM sent
===============
Mike
Posts: 122
Threads: 0
Joined: Nov 2004
(04-03-2022, 09:51 AM)Ohio Mike Wrote: PM sent
===============
Mike
Thanks I will check it out.
