Posts: 215
Threads: 1
Joined: Sep 2010
Location: Great Black Swamp
I have the older Ridgid lunch box planer, TP1300. Have had it for a long time and have used it a lot. Recently noticed that it really screams when I use it, didn't have ear protection on, and really rattles as it winds down. Before I really get into it to see what is going on, has anyone experienced this issue? I did pull the brushes and they look OK. Is this a motor issue for maybe gear box? Would like to fix it if possible. not really interested in buying a new one. Thanks in advance.
Posts: 1,618
Threads: 0
Joined: Feb 2010
Location: Coast of Maine
Likely a cutter head or feed roller bearing(s).
g
I've only had one...in dog beers.
"You can see the stars and still not see the light"
The Eagles: Already Gone
Posts: 1,998
Threads: 1
Joined: Aug 2016
05-07-2022, 05:15 PM
(This post was last modified: 05-07-2022, 05:16 PM by Roly.)
(05-07-2022, 04:59 PM)NWOhioJim Wrote: I have the older Ridgid lunch box planer, TP1300. Have had it for a long time and have used it a lot. Recently noticed that it really screams when I use it, didn't have ear protection on, and really rattles as it winds down. Before I really get into it to see what is going on, has anyone experienced this issue? I did pull the brushes and they look OK. Is this a motor issue for maybe gear box? Would like to fix it if possible. not really interested in buying a new one. Thanks in advance.
I would bet on a bearing, probably on cutter head but could also be motor bearings. Remove the drive belt and start up, if not screaming it is the cutter head bearings. Dont think it has a gear box, just a belt driving the cutter head. Roly
Posts: 2,382
Threads: 0
Joined: Dec 2011
Did you register it? Ridgid carries lifetime warranty.
Simon
Posts: 215
Threads: 1
Joined: Sep 2010
Location: Great Black Swamp
(05-07-2022, 11:09 PM)Handplanesandmore Wrote: Did you register it? Ridgid carries lifetime warranty.
Simon
No. Estate sale purchase for $105 12 years ago.
Posts: 2,382
Threads: 0
Joined: Dec 2011
05-08-2022, 08:07 AM
(This post was last modified: 05-08-2022, 12:35 PM by Handplanesandmore.)
If the repair will cost more than $100, consider buying a new Ridgid. But you must register it within 30 days(?) to enjoy the lifetime warranty. They really fix it free for you. My neighbor had his serviced twice over the past 6 years, all for free. He also got a new Ridgid drill after the old one couldnt really be fixed.
Compared to my Dewalt, I dont see much difference in its performance. If mine broke down, the Ridgid would be my first choice.
Simon
Posts: 215
Threads: 1
Joined: Sep 2010
Location: Great Black Swamp
Thanks for all the input. I took it apart and took the belt off. Sounded fine. Decided to put the belt back on to see exactly where the noise was coming from. Sounded fine. So, current problem solved, don't know why. Cleaned it up and put it back together and it runs fine. Back to making more saw dust!
Posts: 1,998
Threads: 1
Joined: Aug 2016
(05-09-2022, 07:46 AM)NWOhioJim Wrote: Thanks for all the input. I took it apart and took the belt off. Sounded fine. Decided to put the belt back on to see exactly where the noise was coming from. Sounded fine. So, current problem solved, don't know why. Cleaned it up and put it back together and it runs fine. Back to making more saw dust!
Just delayed, not solved. Roly
Posts: 769
Threads: 0
Joined: Jan 2007
Location: ATL
I’m betting the bearings are going out.
Posts: 832
Threads: 0
Joined: Apr 2009
Location: Pacifc North Wet --AKA WA
"I’m betting the bearings are going out.'
--Cabinet Monkey
That also was my initial thought.
