08-12-2022, 08:02 AM
Yeah, it was hard to snap this picture, but I'm pretty sure this is an Atkins panel-size saw from the post-1940s era:
Happy woodworking!
Happy woodworking!
Chris
Pretty sure that Field of Dreams farmer used an Atkins saw
|
08-12-2022, 08:02 AM
Yeah, it was hard to snap this picture, but I'm pretty sure this is an Atkins panel-size saw from the post-1940s era:
Happy woodworking!
Chris
08-13-2022, 05:51 PM
Cutting 2 X 12s with a panel saw will make a man out of you...well at least your right arm.
08-15-2022, 07:53 AM
(08-12-2022, 10:39 AM)EightFingers Wrote: Would you set your plane atop a saw? Would you set your saw atop a hand brace?
Still Learning,
Allan Hill
08-16-2022, 02:43 PM
(This post was last modified: 08-16-2022, 02:44 PM by Bill_Houghton.)
Would you use decent tools like the saw, brace, and perhaps plane (can't tell from the photo exactly what the plane is, other than a block plane), and then check level on a project that size with a plastic torpedo level?
Also, a Sharpie, while it will leave a highly visible line, will also leave a wide line, leading to sloppy cuts. But maybe it was good enough for the bleachers being built.
08-16-2022, 03:05 PM
Pretty sure this is a made for TV picture. Those bleachers were probably made with power tools.
Still Learning,
Allan Hill
08-16-2022, 08:10 PM
(08-12-2022, 10:39 AM)EightFingers Wrote: Would you set your plane atop a saw? (08-13-2022, 05:51 PM)Mike Brady Wrote: Cutting 2 X 12s with a panel saw will make a man out of you...well at least your right arm. I was really happy when I got old enough that my dad let me cut a 2X12 with a Skilsaw rather than a hand saw.
08-17-2022, 09:30 AM
(08-16-2022, 02:43 PM)Bill_Houghton Wrote: Would you use decent tools like the saw, brace, and perhaps plane (can't tell from the photo exactly what the plane is, other than a block plane), and then check level on a project that size with a plastic torpedo level? Ha, ha, we all point out such things, but we have to remember that the character, Ray Kinsella, was a farmer, jack of many trades, so typically would work with what is available. My father in law, may he RIP, was a farmer and used some very, very questionable building techniques. But I must say, rode past the old farm the other day and his DIY corn crib was still standing!
Credo Elvem ipsum etiam vivere
Non impediti ratione cogitationis
08-19-2022, 02:01 PM
Yes, all in good fun!
I'll bet even the 1989 2x12's were better wood than what is selling today
Chris
|
|
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.