Posts: 2,580
Threads: 0
Joined: Feb 2001
I have some existing cabinets that have overlay doors that my wife and I want to replace with full inset doors.
The face frame is already in place, so I’d like to mount a European hinge to the back of face frame.
Anybody have a good source that they like to order good quality hinges from?
Posts: 12,883
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
(04-06-2023, 04:00 PM)JDuke Wrote: I have some existing cabinets that have overlay doors that my wife and I want to replace with full inset doors.
The face frame is already in place, so I’d like to mount a European hinge to the back of face frame.
Anybody have a good source that they like to order good quality hinges from?
Woodworker's Hardware is a good source. Best to go to Blum's website first to determine which hinges and mounting plates are needed. I've used the adapters that attach to the back of the face frame. Not impressed as the face frame tends to flex. It works, but it feels cheesy to me. I much prefer to pad out the inside of the cabinet behind the face frame, and use a hinge designed for frameless cabinets.
John
Posts: 2,078
Threads: 1
Joined: Feb 2009
Location: Mechanicsville, Md
I used these guys for hinges and slides.
https://www.woodworkerexpress.com/?gclid...gI0vvD_BwE
Highly recommend
I no longer build museums but don't want to change my name. My new job is a lot less stressful. Life is much better.
Garry
Posts: 10,774
Threads: 0
Joined: Jul 2005
Location: Front seat on the Struggle Bus
AH Turf has good pricing on Blum also.
Ed
Posts: 2,580
Threads: 0
Joined: Feb 2001
(04-06-2023, 07:53 PM)museumguy Wrote: I used these guys for hinges and slides. https://www.woodworkerexpress.com/?gclid...gI0vvD_BwE
Highly recommend
The problem I keep running into, is the modular nature of many of the euro hinges, where you order the hinge and mounting plate separately.
I search up what I think is the hinge I need, then can’t find the right baseplate, or think maybe I’ve found the right one, but then the web sight says they aren’t compatible.
Even Blum website hasn’t been very helpful in finding to correct combination
I may be better off finding someone that sells them already paired, even if I have to pay a bit more.
Thanks
Duke
Posts: 892
Threads: 0
Joined: Apr 2006
Location: Trout Creek, Montana
I have bought Blum inset hinges complete set (2) hinges and mounting plates from Lee Valley.
Treat others as you want to be treated.
“You only live once, but if you do it right, once is enough.” — Mae West.
24- year cancer survivor
Posts: 2,385
Threads: 0
Joined: Jan 2008
Location: Irving, Tx
"I much prefer to pad out the inside of the cabinet behind the face frame, and use a hinge designed for frameless cabinets."
John
I agree. It does take extra time, but I like the result.
"I tried being reasonable..........I didn't like it." Clint Eastwood
Posts: 2,198
Threads: 1
Joined: Sep 2003
Location: Maryland
(04-07-2023, 07:10 AM)Bill Holt Wrote: "I much prefer to pad out the inside of the cabinet behind the face frame, and use a hinge designed for frameless cabinets."
John
I agree. It does take extra time, but I like the result.
Yup.
I used the Blum hinges that installed on the back of the faceframe on my kitchen cabinets. More challenging to install (with narrow cabinets you're drilling and screwing blindly) and base plate screws seem to loosen with use.
Posts: 2,580
Threads: 0
Joined: Feb 2001
(04-07-2023, 07:10 AM)Bill Holt Wrote: "I much prefer to pad out the inside of the cabinet behind the face frame, and use a hinge designed for frameless cabinets."
John
I agree. It does take extra time, but I like the result.
I was considering doing this just because it seems to me 3/4” face frames may not have enough stability to support soft close hinges if someone decided to push the door closed.
Posts: 2,580
Threads: 0
Joined: Feb 2001
(04-06-2023, 09:50 PM)EdL Wrote: AH Turf has good pricing on Blum also.
Ed
Ah turf is a great example of quite a wide selection, but trying to figure out what fits my application is almost impossible from their sight.
Full crank, half crank etc what do I need for full inset, is the crank terminology even used on blums sight which isn’t much help either…
