Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
Now have to wait until this Saturday when son in law gets back from his employers assignment.
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 3,125
Threads: 0
Joined: Oct 2007
Location: Cumming, GA.
Anticipation!
Last time I talked to Roger we ran it in both forward and reverse and made sure the speed range was correct, so you should be good to go once you get it back.
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
(04-18-2023, 01:37 PM)FrankAtl Wrote: Anticipation!
Last time I talked to Roger we ran it in both forward and reverse and made sure the speed range was correct, so you should be good to go once you get it back.
Called a neighbor and he came over last night and we got it on the ways. Now I am working on the mount for the inverter which should be done tomorrow.
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 27,930
Threads: 0
Joined: Jul 2002
Location: Pacific ocean now much further away!
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
6+ months seemed like forever to us being without it.
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 8,205
Threads: 0
Joined: Aug 2002
For the record, I have no more lathes. Gave my ONEWAY 24-36 to a nephew and his daughter, gave my Jet Mini to my son-in-law, another lathe to another son-in-law...
basically gave all my tools away, mostly to family members. Gave a table saw and a radial arm saw to a church member. So I am virtually tool-less.
Oh, I kept a screw driver and a cordless drill. But that's about it.
Now living with a daughter and her husband 30 miles south of where I was before in the Cultural Center of the Great Southwest, if not the Universe.
GM, former doer of things wood
The only tool I have is a lathe. Everything else is an accessory.
