Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
To make groves would you rather use the tablesaw or router?
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 2,383
Threads: 0
Joined: Dec 2011
Table saw because my router table needs to be set up (bit, dust collection etc). I use the router table only if the table saw isn't an option.
Simon
Posts: 1,289
Threads: 0
Joined: Sep 2012
Location: Mobile, Alabama
01-09-2024, 05:07 PM
(This post was last modified: 01-09-2024, 05:09 PM by Willyou.)
The question implies that the grooves are long. Generally I would use the table saw with a dado blade particularly if there are several to do. Also, if the groove is not a standard width, multiple passes might be necessary with a router. A dado blade would be easier to set up for a non-standard width; again particularly if several grooves are required.
Posts: 21,931
Threads: 0
Joined: Oct 2003
(01-09-2024, 11:32 AM)Arlin Eastman Wrote: To make groves would you rather use the tablesaw or router?
Depends on the material; if it’s hard to handle, bring the tool to the stock.
If it’s easy to handle, bring the stock to the tool.
You can’t “bring” a TS to the stock, so this suggests the router.
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
Depends on width, length, bow in the wood.
I do prefer the table saw.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
I would also guess it depends on if you have a stacked dado blades or not too. And then the width of the TS blade.
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 12,608
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
I use the table saw whenever I can, but there are times that the router makes life easier and more sense.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 4,683
Threads: 0
Joined: Jan 2007
Based purely on dust collection I would choose the table saw.
Any free advice given is worth double price paid.
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
(01-11-2024, 05:49 AM)fredhargis Wrote: I use the table saw whenever I can, but there are times that the router makes life easier and more sense.
I have been watching youtube vids and for ease it seems router with a board as a side guide. All is needed is the correct bit and depth.
They have been dados, groves and other cuts as well. If I have alot to do then just move the side board it seems and a dust collector can be used also
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 1,407
Threads: 2
Joined: Jun 2003
I use both depending on the material and task. A router can take longer to set up.
Example, with sheet material a router is often better if the piece is big enough to have to wrestle through the saw and keep against the fence. Stock guides are nice to have here.
The other factor is with a shallow groove there is a risk of the blade coming out of the groove, catching the material and at the very least, ruining the surface. At the worst, causing an injury.
Also, if there is any bow or warp in the material, a router is better b/c it follows the contour.
If you're having to press the ply down through the cut, IMO that's grounds for using a router.
