02-20-2024, 03:24 PM (This post was last modified: 02-20-2024, 03:24 PM by Splinterz25.)
Hello once again I was able to put the finishing touches on my first piece for 2024. I have been showing progress on this piece as I made it. Made from Maple first turned hollow on the lathe, it finished at 7" x 7". Then the pattern was hand drawn and hand carved, 21 Kokopelli's in all. Some pyrography was added for shading then alcohol inks were added for coloring the hand carved leather straps, the final finish is satin lacquer.
Beautiful. I can barely imagine and never duplicate the patience required to produce such a piece. I'd even be afraid to have it on a shelf for fear that the dog would bump it off.
We do segmented turning, not because it is easy, but because it is hard.
Holy Cow Bruce!!! You've done it again! There is so much air, space, voids, or whatever, the piece looks as light as a feather. And what a masterful job on creating the leather. You have to be a mathematician to figure out the pattern.
"I tried being reasonable..........I didn't like it." Clint Eastwood
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
