Posts: 136
Threads: 0
Joined: Sep 2019
08-22-2024, 09:01 AM
Making a bowl out of some large Black walnut, Red Cedar & Honey locust shavings and Alumilite clear slow Resin. Finished with General Finish's wood bowl finish and Acks paste. Because of the quick cure time, even with a pressure pot, there were a lot of bubbles trapped between the shavings unfortunately. All though a deep pour slower curing resin would have been more ideal, this was an attempt to use up the rest of the batch of resin I had before it got too old and went bad
Posts: 27,928
Threads: 0
Joined: Jul 2002
Location: Pacific ocean now much further away!
Great way to use up everything!
VH07V
Posts: 1,733
Threads: 13
Joined: Jul 2001
Nice.
That has a really neat visual effect in the depth of field, even though I am generally not a fan of the 'let's cover everything in epoxy' trend.
-Mark
If I had a signature, this wouldn't be it.
Posts: 136
Threads: 0
Joined: Sep 2019
(08-23-2024, 09:55 AM)MKepke Wrote: Nice.
That has a really neat visual effect in the depth of field, even though I am generally not a fan of the 'let's cover everything in epoxy' trend.
-Mark
Some people dont like resin but I find it is a very good way to fill voids or spaces on pieces that otherwise would be to far gone to turn