Shop made thickness sander - make free veneer
#9
I recently made a jig that fits on my belt sander and allows me to thickness sand wood right down to veneer. Although it can only do wood up to the width of the belt, it also didn't cost $1200.

I don't try to sell plans or anything, but I'm sure the clever people here can figure it out easily enough. I made a video that can be seen here:

https://youtu.be/BaozDNHvEns

Cheers,

Paul M
http://openwoodshop.com
Reply
#10
That's pretty neat. My only suggestion would be to incorporate a spring loaded hold down before the wood meets the sander like how commercial sanders are made. That way you don't inadvertently create divots in your piece if you lift up on your piece as you feed it in.
Reply
#11
I love it. I enjoyed some of your other videos too.
Reply
#12
very cool. welcome to the forum!
Reply
#13
Hi Paul,
Welcome aboard.  I like your site and especially the kayak designs.  Building a kayak is on my bucket list.

As far as the sander I need to make one to tide me over till I can find space for a bigger one.  I am not sure if all belt sanders have this but my 20 year old one has a handle hole on either side.  There is a hole that goes all the way through the belt sander.  I used it to put a hanger bolt all the way through it.  It has wood threads on one side and a machined bolt on the other side.  You can use it to mount the belt sander to board and hold it into place.
A carpenter's house is never done.
Reply
#14
(02-13-2018, 11:59 PM)paulmon Wrote: I recently made a jig that fits on my belt sander and allows me to thickness sand wood right down to veneer. Although it can only do wood up to the width of the belt, it also didn't cost $1200.

I don't try to sell plans or anything, but I'm sure the clever people here can figure it out easily enough. I made a video that can be seen here:

https://youtu.be/BaozDNHvEns

Cheers,

Paul M
http://openwoodshop.com
Excellent Thanks
Reply
#15
(02-13-2018, 11:59 PM)paulmon Wrote: I recently made a jig that fits on my belt sander and allows me to thickness sand wood right down to veneer. Although it can only do wood up to the width of the belt, it also didn't cost $1200.

I don't try to sell plans or anything, but I'm sure the clever people here can figure it out easily enough. I made a video that can be seen here:

https://youtu.be/BaozDNHvEns

Cheers,

Paul M
http://openwoodshop.com
All we need now is some smart guy to figure out how to take apart a belt sander and add large rollers to it.  Then they could enlarge your design.  Mattias used a screw gun for a power feeder!
RP
Reply
#16
Yep, great site, keep 'em coming.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.