Grizzly Bandsaw 3/4" wide blade
#10
Has any of you that has a Grizzly G0555LX  used a 3/4 wide blade ?
How did the blade run, tracking ?
Reply
#11
Isn't that a bit wide for a 14" saw?
Reply
#12
I put the 3/4 Timberwolf on my G0555. It cut ok but I had to really crank the spring to get it tensioned.
Make Frat Boys Great Again 
Reply
#13
I tried one but mine worked best with a half inch blade.
Reply
#14
Thats a lota blade for a 14
Steve

Mo.



I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24


 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Reply
#15
(09-07-2018, 04:18 PM)med-one Wrote: Isn't that a bit wide for a 14" saw?

For a Grizzly cast iron saw? Sure seems like it. For something like a 14" Laguna LT14 SUV? Maybe not.
Reply
#16
(09-07-2018, 04:18 PM)med-one Wrote: Isn't that a bit wide for a 14" saw?

Yes I thought it is a bit to wide for a 14" bandsaw but the manual says it will handle a 3/4" wide blade, guess you can't believe every you read.

Thanks guys for your input.
Reply
#17
Never used anything wider than 1/2 on my 555 when I had it. Always used Timberwolf's, worked good and easy to tension.

Ed
Reply
#18
(09-07-2018, 10:05 PM)EdL Wrote: Never used anything wider than 1/2 on my 555 when I had it. Always used Timberwolf's, worked good and easy to tension.

Ed

I have to agree with you Thanks.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.