Posts: 920
Threads: 0
Joined: Oct 2001
I'm thinking of using General Finishes golden oak water based stain on an ash grandfather clock. Several coats of Waterlox would follow. Does this sound reasonable?
Posts: 6,678
Threads: 1
Joined: Jan 2003
Location: Southern California
It is a personal thing as far as color. As far as finish compatibility, I do not know of any problems.
Thanks, Curt
-----------------
"Life can only be understood backwards; but it must be lived forwards."
-- Soren Kierkegaard
Posts: 4,133
Threads: 0
Joined: Oct 2009
Location: Lawrence, KS
Fully compatible. You will get a bit of grain raising. And I've found the GF has a bit more surface tension so add a drop or two of dish soap per quart of the stain. Don't shake, stir gently for no foam. And flood the surface. Now the the stain will get down into the open grain more easily.
Don't sweat the petty things and don't pet the sweaty things. -- G. Carlin
Posts: 84
Threads: 0
Joined: Oct 2003
Location: North Carolina
Just a reminder to test your finishing schedule on scrap to make sure the color, finish is what you want.
Ed
Posts: 4,685
Threads: 0
Joined: Jan 2007
You might try a sample board dampened lightly with water before applying the water based stain to allow more even color. Always have to remind myself to check my finishing schedule first before hitting anything new or different products too.
Any free advice given is worth double price paid.
Posts: 4,133
Threads: 0
Joined: Oct 2009
Location: Lawrence, KS
(11-25-2018, 09:13 AM)Ed in NC Wrote: Just a reminder to test your finishing schedule on scrap to make sure the color, finish is what you want.
This, this, a thousand times, this!
Don't sweat the petty things and don't pet the sweaty things. -- G. Carlin
