How to show off figure in a piece of wood
#14
  Re: How to show off figure in a piece of wood by stoppy (After a several year...)
Sorry for the four posts,  could not figure out how to get the pics in one post.
Jim

Remember the bird has a right wing and a left wing and uses both to fly. 
Reply
#15
  Re: How to show off figure in a piece of wood by stoppy (After a several year...)
Beautiful piece of wood thanks for showing all sides, after seeing those photos would pause before cutting into blanks. Just not sure if could drill and tap some portions of the wood or have enough of a top once I did.

Maybe other might have better suggestions on how to move forward.

Good luck with it know your stoppers will be beautiful!
Bill
Reply
#16
  Re: How to show off figure in a piece of wood by stoppy (After a several year...)
seeing the photos, I would build a form around it using your first photo to the bottom and fill with clear casting resin. you will get much more use from the entire blank.
Life is what you make of it, change your thinking, change your life!
Don's woodshop
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)