09-23-2019, 09:28 AM
1. When do you replace the brushes on a router? There appears to be about 1/4" of an inch of the actual brush left, do I let that go until there is only an 1/8" or so?
2, On the Armature there is the copper area that the Brushes rub against. The one on my router is pretty much uniformly black. Should I clean that and if yes how and with what, I was thinking some rubbing alchol and Q Tips, but wasn't sure.
3, I also blew as much dust out of the unit as I could, any other preventive maintenance I should do?
4. The bearing rotate smoothly, and I can't seem to introduce any wobble, but how do you really check those?
2, On the Armature there is the copper area that the Brushes rub against. The one on my router is pretty much uniformly black. Should I clean that and if yes how and with what, I was thinking some rubbing alchol and Q Tips, but wasn't sure.
3, I also blew as much dust out of the unit as I could, any other preventive maintenance I should do?
4. The bearing rotate smoothly, and I can't seem to introduce any wobble, but how do you really check those?
