01-04-2023, 04:33 PM (This post was last modified: 01-04-2023, 04:35 PM by Splinterz25.)
LET THERE BE DRAGONS
Okay everyone the drawings are complete. These are only pencil guide lines for the carving and more detail will be added while carving. This will be a combo of piercing and 3-D carving and there will be coloring added, I'll go into that later. This is not the name of this piece and all of the drawings are my own design hand drawn on the vase.
do you seal that to prevent smudging while you're doing the carving?
Thank you Bill, Great question arthropod.. I use the last parts of spray lacquer cans and just give the drawings a light mist to seal them it. I find this a great use for the bottom of a spray can, that I would not use on any project.
(01-05-2023, 05:06 PM)Splinterz25 Wrote: Thank you Bill, Great question arthropod.. I use the last parts of spray lacquer cans and just give the drawings a light mist to seal them it. I find this a great use for the bottom of a spray can, that I would not use on any project.
01-08-2023, 10:25 AM (This post was last modified: 01-08-2023, 10:26 AM by Splinterz25.)
Photo carving up date: I didn't get as much done yesterday, that JOB thing got in the way. So I'm making progress lots of outline cutting and now boring to remove large sections. I also started some 3-D carving in a few places. If you have any questions please just ask.
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
