Today, 08:55 AM
I was watching Stumpy Nubs on You Tube the other night. Trust me, I take all you tubers with a grain of salt. Anyway he gave a recommendation about how well Owl bits worked and they somehow didn't have much if any blow out at the bottom of the hole
Well, I have to drill several holes by hand through the top of the work bench I am building. Anyway I checked out Amazon and I found an Owl 3/4 inch bit and the advertisement read developed for battery operated drills. So I bought one.
In a drill press it drills as clean a hole as any forester bit and is a lot easier to line up. Drills a lot fasted with less heat. Drilling through 4 inches of Ash with a 3/4 drill drill bit in a hand drill is not fun, but the Owl bit did it quite easily. Once a person gets so deep chip ejection became a problem and the drill has to be remover about every 1/2 inch for chip removal.
I do not impress easily but the owl bits impressed me enough to order a set of 7, 3/8ths through 1 1/4. They will replace the forstner bits of that size in my shop.
I thought I would pass along that I really like the Owl bits, And for what it is worth, I would recommend that you try one.
Tom
Well, I have to drill several holes by hand through the top of the work bench I am building. Anyway I checked out Amazon and I found an Owl 3/4 inch bit and the advertisement read developed for battery operated drills. So I bought one.
In a drill press it drills as clean a hole as any forester bit and is a lot easier to line up. Drills a lot fasted with less heat. Drilling through 4 inches of Ash with a 3/4 drill drill bit in a hand drill is not fun, but the Owl bit did it quite easily. Once a person gets so deep chip ejection became a problem and the drill has to be remover about every 1/2 inch for chip removal.
I do not impress easily but the owl bits impressed me enough to order a set of 7, 3/8ths through 1 1/4. They will replace the forstner bits of that size in my shop.
I thought I would pass along that I really like the Owl bits, And for what it is worth, I would recommend that you try one.
Tom