Power drill or grinder - Printable Version +- Woodnet Forums (https://forums.woodnet.net) +-- Thread: Power drill or grinder (/showthread.php?tid=7321499) Pages:
1
2
|
RE: Power drill or grinder - PaulC - 08-11-2016 .308 Win for the win. RE: Power drill or grinder - daddo - 08-11-2016 With a 168 Grain Match HPBT for sure. RE: Power drill or grinder - Foggy - 08-11-2016 Ax or hatchet. RE: Power drill or grinder - thewizzard - 08-12-2016 (08-11-2016, 06:30 PM)SceneryMaker Wrote: Waste of time Its kind'a like counting the number of licks to the center of a tootsi-pop RE: Power drill or grinder - Woodshop - 08-13-2016 do let anyone pee on your parade, it's a good thing when someone is recycling. I use a razor knife, poke the tip through, leaving it in while the gas is released. then slice it open, push the cut down inside and dump it out. very easy. I used them for boy scout craft projects. we made Christmas wreath door chines , used guitar strings, glass marbles, hot glue ,fishing line and screws. similar to this one. very fun projects RE: Power drill or grinder - Admiral - 08-13-2016 (08-11-2016, 08:45 PM)PaulC Wrote: .308 Win for the win. Overkill. .223 will do nicely, and cost per round is less. Make some sport of it, place it 200 yds out. RE: Power drill or grinder - fixtureman - 08-14-2016 (08-13-2016, 12:54 PM)Admiral Wrote: Overkill. .223 will do nicely, and cost per round is less. Make some sport of it, place it 200 yds out. But make sure it is an evil black one |